Source-backed diagnostic reference

P0762 Code: Meaning & Diagnostic Guide

Shift Solenoid C Stuck On

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0762 mean?

  • GENERIC: Shift Solenoid C Stuck On Source
  • GENERIC: Shift Solenoid C Stuck On Source

P0762 quick answer

P0762 is a generic powertrain code meaning “Shift Solenoid C Stuck On.” It indicates that the transmission control system detected a condition consistent with solenoid C remaining on; it does not, by itself, confirm which part has failed.

Is P0762 generic or manufacturer-specific?

P0762 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0762 works in the vehicle

A shift solenoid is an electrically controlled valve that helps direct transmission fluid for gear changes. “Stuck on” describes the condition reported by the code, not proof that the solenoid itself is defective. The exact operation and diagnostic procedure can vary by vehicle.

P0762 symptoms

Depending on the vehicle and the underlying cause, possible symptoms include harsh or delayed shifts, unexpected gear selection, reduced performance, or an illuminated check-engine light. Some vehicles may show few noticeable symptoms.

Possible causes of P0762

Possible causes can include a solenoid or wiring problem, a connector issue, a fluid or hydraulic concern, or a transmission control problem. These are diagnostic possibilities, not confirmed causes for every P0762 occurrence.

How to diagnose P0762

  1. Record all stored and pending codes, along with available freeze-frame information.
  2. Check the vehicle’s service information for the code-specific procedure and operating conditions.
  3. Inspect accessible transmission wiring and connectors for damage, corrosion, or loose connections.
  4. Check transmission fluid condition and level using the vehicle maker’s specified procedure.
  5. Use appropriate scan-tool tests and electrical checks to narrow down the cause before replacing parts.

How to fix P0762

The repair depends on the test results and vehicle-specific service information. A technician may need to investigate wiring, fluid or hydraulic operation, the solenoid, or transmission controls. Avoid replacing a component based only on the code.

Can I drive with P0762?

Driving impact can vary. If shifting is abnormal, the vehicle loses power, or a warning appears, stop somewhere safe and seek professional advice. Consult the owner’s manual or a qualified technician for guidance specific to the vehicle.

P0762 frequently asked questions

What does P0762 mean?

P0762 is a generic code for “Shift Solenoid C Stuck On,” indicating a detected condition associated with that solenoid’s operation.

Does P0762 prove that shift solenoid C has failed?

No. The code reports a detected condition but does not identify the failed part or root cause on its own.

Can I keep driving with P0762?

That depends on the symptoms and vehicle. Abnormal shifting or reduced performance warrants prompt professional assessment; follow the owner’s manual and seek vehicle-specific advice.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.