Source-backed diagnostic reference

P076B Code: Meaning & Diagnostic Guide

Shift Solenoid H Performance/Stuck Off

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P076B mean?

  • GENERIC: Shift Solenoid H Performance/Stuck Off Source
  • GENERIC: Shift Solenoid H Performance/Stuck Off Source

P076B quick answer

P076B is a generic transmission diagnostic trouble code meaning “Shift Solenoid H Performance/Stuck Off.” It indicates that the transmission control system detected performance from shift solenoid H that may be outside expected operation; it does not, by itself, confirm which part has failed.

Is P076B generic or manufacturer-specific?

P076B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P076B works in the vehicle

A shift solenoid is an electrically controlled valve that helps direct transmission fluid to manage gear changes. “Stuck off” or “performance” describes the detected behavior, not a confirmed diagnosis. The exact solenoid location and testing procedure depend on the vehicle.

P076B symptoms

Depending on the vehicle and the underlying issue, possible symptoms include harsh, delayed, or unexpected shifts, limited gear operation, or an illuminated check-engine light. Some vehicles may show few noticeable symptoms.

Possible causes of P076B

Possible causes can include a solenoid or wiring concern, a connector problem, transmission-fluid issues, or another fault affecting transmission control. P076B alone does not establish any of these as the cause.

How to diagnose P076B

  1. Confirm P076B with a compatible scan tool and note any other codes.
  2. Record available freeze-frame data, which captures vehicle conditions when the code was set.
  3. Check the vehicle-specific service information for the code definition and the location of shift solenoid H.
  4. Have a qualified technician inspect relevant wiring and connectors and perform the specified electrical and transmission tests.
  5. Use test results to identify the cause before replacing parts or clearing the code.

How to fix P076B

The appropriate repair depends on diagnosis and may involve addressing a wiring, connector, fluid, solenoid, or other transmission-control issue. Avoid replacing the solenoid based only on the code; follow vehicle-specific service information and consult a qualified technician.

Can I drive with P076B?

Driving advice depends on symptoms and the vehicle. If shifting is erratic, gears are unavailable, or the vehicle does not operate normally, stop driving when safe and seek professional advice. If there are no noticeable symptoms, arrange a timely diagnosis rather than assuming the vehicle is safe to continue using.

P076B frequently asked questions

Does P076B prove that shift solenoid H has failed?

No. The code reports a performance or stuck-off condition, but diagnosis is needed to determine whether the solenoid or another issue is responsible.

Can I identify shift solenoid H from the code alone?

No. Its location and vehicle-specific meaning can vary. Check service information for the exact vehicle.

Should I clear P076B and keep driving?

Clearing the code does not fix the underlying issue. Have the code and any symptoms assessed, and avoid driving if shifting or vehicle operation is abnormal.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.