Source-backed diagnostic reference

P07B4 Code: Meaning & Diagnostic Guide

Transmission Park Position Sensor/Switch A Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P07B4 mean?

  • GENERIC: Transmission Park Position Sensor/Switch A Circuit High Source
  • GENERIC: Transmission Park Position Sensor/Switch A Circuit High Source

P07B4 quick answer

P07B4 is a generic powertrain code for a high signal in the Transmission Park Position Sensor/Switch A circuit. It identifies a circuit condition, not a confirmed failed part.

Is P07B4 generic or manufacturer-specific?

P07B4 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P07B4 works in the vehicle

The transmission park position sensor or switch reports whether the transmission is in Park. “Circuit high” means the control system detected a signal voltage or level above its expected range. The exact circuit design and diagnostic procedure can vary by vehicle.

P07B4 symptoms

Depending on the vehicle and the cause, the code may appear with a warning light, a Park-position indication problem, or difficulty starting or shifting. These symptoms are not established by the code alone.

Possible causes of P07B4

Possible causes include an electrical connection or wiring problem, a sensor or switch issue, or a problem elsewhere in the circuit. P07B4 alone does not identify which, if any, component has failed.

How to diagnose P07B4

  1. Confirm P07B4 with a scan tool and note any other stored codes and vehicle symptoms.
  2. Check the vehicle’s service information for the specific circuit description and test procedure.
  3. Inspect accessible connectors and wiring for visible damage, looseness, or corrosion.
  4. Have a qualified technician test the circuit and sensor or switch according to the vehicle-specific procedure before replacing parts.

How to fix P07B4

Repair depends on test results. A technician may need to address wiring or connector faults or evaluate the sensor or switch; do not replace a component based on the code alone.

Can I drive with P07B4?

The code by itself does not establish whether the vehicle is safe to drive. If the vehicle will not reliably recognize Park, has trouble starting or shifting, or shows other concerning symptoms, avoid driving and seek qualified advice.

P07B4 frequently asked questions

What does P07B4 mean?

It indicates a high signal in the Transmission Park Position Sensor/Switch A circuit.

Does P07B4 prove the park position sensor has failed?

No. It identifies a circuit condition, and diagnosis is needed to determine the cause.

Can I keep driving with P07B4?

The code alone cannot determine that. Consider the vehicle’s symptoms and get qualified advice, especially if Park is not recognized reliably or shifting is affected.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.