P0873 Code: Meaning & Diagnostic Guide
Transmission Fluid Pressure Sensor/Switch C Circuit High
What does P0873 mean?
P0873 quick answer
P0873 is a generic OBD-II code for “Transmission Fluid Pressure Sensor/Switch C Circuit High.” It means the control system detected a signal that was higher than expected in that circuit; the code alone does not confirm which part has failed.
Is P0873 generic or manufacturer-specific?
P0873 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0873 works in the vehicle
The pressure sensor or switch reports information about transmission fluid pressure to the vehicle’s control system. “Circuit high” describes an electrical signal above the expected range, not necessarily excessive fluid pressure.
P0873 symptoms
Possible symptoms include a warning light, unusual or harsh shifting, or limited-performance mode. A vehicle may show no obvious symptoms; the code alone does not establish what symptoms are present.
Possible causes of P0873
Possibilities include damaged wiring, a poor or contaminated connector, a sensor or switch fault, or another circuit or pressure-related issue. These are possibilities, not confirmed causes.
How to diagnose P0873
- Record P0873 and any other stored codes and relevant scan-tool data before clearing codes.
- Use vehicle-specific service information to identify the Sensor/Switch C circuit and its expected readings.
- Check the related wiring and connectors for visible damage, corrosion, looseness, or contamination.
- Have a qualified technician test the circuit and compare sensor readings with specifications before replacing parts.
How to fix P0873
The repair depends on test results. Address any verified wiring or connector problem, and replace a sensor or switch only if diagnosis confirms it is faulty. Do not assume the code by itself identifies a failed component.
Can I drive with P0873?
If shifting is abnormal, a warning appears, or the vehicle’s performance is limited, avoid unnecessary driving and arrange a professional inspection. If there are no noticeable symptoms, consult the owner’s manual or a technician for vehicle-specific advice; this code alone does not establish whether driving is safe.
P0873 frequently asked questions
Does P0873 mean the transmission pressure is too high?
Not necessarily. “Circuit high” refers to an electrical signal above the expected range; it does not by itself confirm high fluid pressure.
Does P0873 prove the pressure sensor or switch has failed?
No. Wiring, connectors, or other circuit or pressure-related issues may also be involved. Testing is needed to identify the cause.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.