Source-backed diagnostic reference

P0878 Code: Meaning & Diagnostic Guide

Transmission Fluid Pressure Sensor/Switch D Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0878 mean?

  • GENERIC: Transmission Fluid Pressure Sensor/Switch D Circuit High Source
  • GENERIC: Transmission Fluid Pressure Sensor/Switch D Circuit High Source

P0878 quick answer

P0878 is a generic OBD-II code meaning the transmission fluid pressure sensor/switch D circuit is reporting a high electrical signal. It does not by itself confirm that transmission pressure is high or identify a failed part.

Is P0878 generic or manufacturer-specific?

P0878 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0878 works in the vehicle

The powertrain control module monitors a signal from a transmission pressure sensor or switch. “Circuit high” describes the signal level detected; the exact meaning, wiring, and test procedure can vary by vehicle.

P0878 symptoms

Possible symptoms include a warning light, rough or delayed shifting, or transmission operation that feels different. Some vehicles may show no obvious symptoms.

Possible causes of P0878

Depending on the vehicle, possibilities include a wiring or connector issue, a sensor or switch problem, a fluid-related condition, or another transmission-control issue. The code alone does not establish the cause.

How to diagnose P0878

  1. Record P0878 and any other stored codes and note when the symptoms occur.
  2. Check the vehicle-specific service information for the definition, circuit layout, and diagnostic procedure.
  3. Inspect accessible wiring and connectors for visible damage, loose connections, or corrosion.
  4. Have a qualified technician test the circuit and compare sensor readings with vehicle-specific specifications.
  5. Check transmission fluid only using the procedure specified for the vehicle.

How to fix P0878

Address the cause confirmed by testing. Depending on the findings, this may involve repairing a circuit or connector, replacing a verified faulty sensor or switch, or diagnosing a fluid or transmission-control issue. Avoid replacing parts based on the code alone.

Can I drive with P0878?

Driving impact depends on the vehicle and symptoms. If shifting is abnormal, a warning indicates a transmission problem, or the vehicle behaves unpredictably, stop when safe and arrange professional advice or service. Consult the owner’s manual for vehicle-specific guidance.

P0878 frequently asked questions

Does P0878 mean transmission pressure is too high?

Not necessarily. “Circuit high” refers to the electrical signal detected, not a confirmed measurement of high transmission pressure.

Does P0878 prove the pressure sensor is faulty?

No. Wiring, connectors, fluid-related conditions, or other control issues may also need to be considered.

Can I diagnose P0878 the same way on every vehicle?

No. The circuit design and test specifications vary, so use service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.