P0935 Code: Meaning & Diagnostic Guide
Hydraulic Pressure Sensor Circuit High
What does P0935 mean?
P0935 quick answer
P0935 has conflicting generic descriptions in the supplied references: “Hydraulic Pressure Sensor Circuit High” and “Hydraulic Pump Relay Circuit/Open.” The code alone does not confirm a failed part. Check the vehicle-specific service information and diagnostic data to identify which description applies.
Is P0935 generic or manufacturer-specific?
P0935 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0935 works in the vehicle
A diagnostic trouble code (DTC) records a condition detected by a vehicle control system. “Circuit high” generally means a monitored electrical signal is higher than expected; “circuit/open” generally means the circuit may be interrupted or not conducting as expected. Because the generic references disagree about P0935, its exact meaning depends on the vehicle and system.
P0935 symptoms
The code may appear with a warning light or changes in operation of a system that uses hydraulic pressure. Symptoms are not established by the code alone, and some vehicles may show no obvious symptoms.
Possible causes of P0935
Depending on the vehicle-specific definition, possibilities may include an electrical connection or wiring problem, a pressure-sensor signal issue, or a pump-relay circuit issue. The supplied generic references do not establish a confirmed failed component.
How to diagnose P0935
- Record the vehicle’s year, make, model, powertrain, and any other stored codes.
- Look up P0935 in reliable service information for that specific vehicle; do not assume either generic description applies.
- Note warning messages and operating conditions when the code appeared, and review available scan-tool data.
- Have a qualified technician inspect the relevant circuit and connections using the vehicle-specific diagnostic procedure.
- Confirm the repair by clearing the code only when appropriate and checking whether it returns.
How to fix P0935
Do not replace a sensor, relay, pump, or control module based on P0935 alone. The correct repair depends on the vehicle-specific definition and test results. Ask a qualified technician to diagnose the applicable circuit before parts are replaced. Do not attempt hazardous high-voltage repairs.
Can I drive with P0935?
P0935 alone does not establish whether a vehicle is safe to drive. If you notice impaired operation, serious warning messages, or a change that makes control difficult, stop somewhere safe and seek professional assistance. Otherwise, consult vehicle-specific guidance and arrange diagnosis promptly.
P0935 frequently asked questions
What does P0935 mean?
Generic references disagree: one describes a hydraulic pressure sensor circuit signal that is too high, while another describes a hydraulic pump relay circuit that is open. Check service information for the specific vehicle.
Does P0935 mean the hydraulic pressure sensor has failed?
No. The code does not confirm a failed sensor. Its meaning is ambiguous in the supplied generic references, and diagnosis is needed before replacing parts.
Can I keep driving with P0935?
The code alone cannot determine whether driving is appropriate. Consider the vehicle’s warnings and behavior, follow its owner guidance, and seek assistance if operation is impaired.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.