Source-backed diagnostic reference

P0947 Code: Meaning & Diagnostic Guide

Hydraulic Pump Relay/Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0947 mean?

  • GENERIC: Hydraulic Pump Relay/Control Circuit Low Source
  • GENERIC: Hydraulic Pump Relay/Control Circuit Low Source

P0947 quick answer

P0947 is a generic powertrain code for a low signal in the hydraulic pump relay/control circuit. It identifies a circuit condition, not a confirmed failed relay or pump.

Is P0947 generic or manufacturer-specific?

P0947 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0947 works in the vehicle

“Circuit low” means the control module detected a signal or voltage below the expected range in the hydraulic pump relay/control circuit. The exact circuit design and diagnostic criteria can vary by vehicle.

P0947 symptoms

Symptoms depend on the vehicle and system involved. This code may appear with a warning light or a related system concern, but the supplied reference does not establish any specific symptoms.

Possible causes of P0947

Possible causes can include a wiring or connector issue, a relay or control-circuit problem, or another fault in the circuit. P0947 alone does not confirm which component, if any, has failed.

How to diagnose P0947

  1. Record the code and check for other stored codes and relevant symptoms.
  2. Use vehicle-specific service information to identify the circuit and its diagnostic procedure.
  3. With appropriate training and equipment, inspect accessible wiring and connectors for damage, looseness, or corrosion.
  4. Have a qualified technician test the circuit and related components against the vehicle manufacturer's specifications before replacing parts.

How to fix P0947

Repair depends on test results and vehicle-specific service information. Do not replace the relay or pump based on the code alone. If the system involves high voltage, leave diagnosis and repair to a qualified technician; do not open or service high-voltage components.

Can I drive with P0947?

The code by itself does not establish whether the vehicle is safe to drive. Follow any vehicle warnings and consult the owner's manual or a qualified technician; avoid driving if the vehicle has a serious system malfunction or unsafe behavior.

P0947 frequently asked questions

What does P0947 mean?

It indicates a low signal in the generic hydraulic pump relay/control circuit.

Does P0947 prove the hydraulic pump or relay has failed?

No. The code identifies a circuit condition and does not confirm a failed component.

Can the exact meaning vary by vehicle?

Yes. The code definition is generic, while circuit layout and test procedures can vary. Check vehicle-specific service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.