Source-backed diagnostic reference

P0964 Code: Meaning & Diagnostic Guide

Pressure Control Solenoid B Control Circuit/Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0964 mean?

  • GENERIC: Pressure Control Solenoid B Control Circuit/Open Source
  • GENERIC: Pressure Control Solenoid B Control Circuit/Open Source

P0964 quick answer

P0964 is a generic powertrain code for “Pressure Control Solenoid B Control Circuit/Open.” It indicates that the control circuit for transmission pressure-control solenoid B is reported as open; the code alone does not confirm which part has failed.

Is P0964 generic or manufacturer-specific?

P0964 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0964 works in the vehicle

A pressure-control solenoid is an electrically controlled valve used to regulate transmission fluid pressure. “Circuit/open” means the control circuit appears electrically incomplete or disconnected. The exact circuit design and diagnostic procedure depend on the vehicle.

P0964 symptoms

Depending on the vehicle and fault, possible symptoms may include transmission shifting changes or a warning light. Some vehicles may show no obvious symptoms.

Possible causes of P0964

Possibilities include a wiring or connector problem, an issue with the solenoid or its circuit, or a control-system fault. P0964 by itself does not establish a specific cause.

How to diagnose P0964

  1. Record P0964 and any other stored codes and freeze-frame information with a suitable scan tool.
  2. Check the vehicle-specific service information for the circuit description and test procedure.
  3. Inspect accessible wiring and connectors for damage, looseness, corrosion, or disconnection.
  4. Have circuit and solenoid tests performed using the manufacturer’s specified procedure before replacing parts.

How to fix P0964

Repair or replace a component only after testing identifies the fault. Because circuit layouts and procedures vary, consult vehicle-specific service information or a qualified technician.

Can I drive with P0964?

Driving impact cannot be determined from P0964 alone. If shifting is abnormal, a warning appears, or the vehicle feels unsafe to operate, stop driving when it is safe to do so and seek professional advice.

P0964 frequently asked questions

What does P0964 mean?

It is a generic code for Pressure Control Solenoid B Control Circuit/Open.

Does P0964 prove the solenoid has failed?

No. The code identifies a reported open control circuit, not a confirmed failed component.

Can I diagnose P0964 without vehicle-specific information?

A code reader can report the code, but circuit layout and testing depend on the vehicle. Use the applicable service information or consult a technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.