Source-backed diagnostic reference

P0995 Code: Meaning & Diagnostic Guide

Transmission Fluid Pressure Sensor/Switch F Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0995 mean?

  • GENERIC: Transmission Fluid Pressure Sensor/Switch F Circuit High Source
  • GENERIC: Transmission Fluid Pressure Sensor/Switch F Circuit High Source

P0995 quick answer

P0995 is a generic powertrain code for “Transmission Fluid Pressure Sensor/Switch F Circuit High.” It indicates that the control system detected a high electrical signal in the circuit for pressure sensor or switch F; it does not, by itself, identify a failed part.

Is P0995 generic or manufacturer-specific?

P0995 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0995 works in the vehicle

The pressure sensor or switch reports information about transmission fluid pressure to the vehicle’s control system. “Circuit high” describes an electrical reading above the expected range, not necessarily excessive fluid pressure. The exact sensor location and test values depend on the vehicle.

P0995 symptoms

Some vehicles may show a warning light, shift differently, or enter a reduced-performance mode, while others may have no obvious symptoms. These are possibilities, not confirmed effects of this code on every vehicle.

Possible causes of P0995

Possible causes include a wiring or connector problem, a sensor or switch issue, or another circuit fault. The code alone does not confirm the cause or establish that the transmission itself has failed.

How to diagnose P0995

  1. Record all stored codes and available freeze-frame data before clearing anything.
  2. Check vehicle-specific service information for the circuit, sensor identification, and diagnostic procedure.
  3. With the vehicle safely parked, check for accessible wiring or connector damage; avoid disturbing high-voltage components.
  4. Have a qualified technician test the circuit and sensor using the correct vehicle-specific procedure before replacing parts.

How to fix P0995

Base repairs on test results. A wiring or connector repair, sensor or switch replacement, or another repair may be appropriate depending on the diagnosis. Do not replace a component solely because P0995 is stored.

Can I drive with P0995?

Driving impact cannot be determined from this code alone. If shifting is abnormal, a warning appears, or the vehicle loses power, stop when safe and arrange professional assessment. Otherwise, consult vehicle-specific guidance and have the code diagnosed promptly.

P0995 frequently asked questions

What does P0995 mean?

It means the transmission fluid pressure sensor/switch F circuit has registered a high electrical signal.

Does P0995 prove the pressure sensor is bad?

No. Wiring, connectors, the sensor or switch, and other circuit issues may need to be checked.

Can I drive with P0995?

The code alone does not establish whether driving is safe or unsafe. Consider symptoms and vehicle-specific guidance, and seek diagnosis promptly.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.