Source-backed diagnostic reference

P0B02 Code: Meaning & Diagnostic Guide

Electric/Auxiliary Transmission Fluid Pump Motor Phase U Current High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0B02 mean?

  • GENERIC: Electric/Auxiliary Transmission Fluid Pump Motor Phase U Current High Source
  • GENERIC: Electric/Auxiliary Transmission Fluid Pump Motor Phase U Current High Source

P0B02 quick answer

P0B02 is a generic diagnostic trouble code for “Electric/Auxiliary Transmission Fluid Pump Motor Phase U Current High.” It indicates that the vehicle detected higher-than-expected current in one motor phase; it does not by itself confirm which part has failed.

Is P0B02 generic or manufacturer-specific?

P0B02 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0B02 works in the vehicle

“Phase U” is a label for one of the motor’s electrical phases. “Current high” means the detected electrical current was above the system’s expected range. The code alone does not identify the cause or confirm that the pump motor is defective.

P0B02 symptoms

The evidence provided does not specify symptoms. Depending on the vehicle and operating conditions, a stored code may appear with no obvious symptoms or alongside transmission or hybrid-system warnings. Check the vehicle’s messages and other diagnostic codes.

Possible causes of P0B02

The code does not establish a cause. Possible areas for a qualified technician to investigate include the pump motor, its electrical connections or wiring, and the pump’s control system. Vehicle-specific diagnostic information is needed to narrow this down.

How to diagnose P0B02

  1. Record the code and any accompanying warning messages; note whether P0B02 is current, pending, or stored.
  2. Use a suitable scan tool to check for related codes and available freeze-frame or system data.
  3. Consult service information for the specific vehicle to confirm the code definition and diagnostic procedure.
  4. Have a qualified technician inspect the relevant pump circuit and connections using the vehicle-specific procedure.
  5. Do not probe or repair high-voltage components yourself; refer high-voltage diagnosis to a properly trained technician.

How to fix P0B02

Do not replace a pump or other component based on P0B02 alone. The appropriate repair depends on vehicle-specific testing that identifies the source of the high-current reading. Use qualified service, especially if high-voltage systems may be involved.

Can I drive with P0B02?

The supplied evidence does not establish whether driving is safe or unsafe. Follow the vehicle’s warning messages and owner’s manual. If the vehicle shows a transmission or hybrid-system warning, changes how it drives, or loses power, stop when safe and contact a qualified service provider.

P0B02 frequently asked questions

What does P0B02 mean?

It is a generic code indicating high current detected in phase U of an electric or auxiliary transmission-fluid pump motor.

Does P0B02 prove the pump motor has failed?

No. The code reports a detected electrical condition, not a confirmed failed component. Further vehicle-specific diagnosis is needed.

Can I diagnose or repair P0B02 at home?

You can record the code and related warnings, but diagnosis may involve electrical or high-voltage systems. Have testing and repairs performed by a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.