Source-backed diagnostic reference

P0B38 Code: Meaning & Diagnostic Guide

Motor Electronics Coolant Pump B Control Circuit/Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0B38 mean?

  • GENERIC: Motor Electronics Coolant Pump B Control Circuit/Open Source
  • GENERIC: Motor Electronics Coolant Pump B Control Circuit/Open Source

P0B38 quick answer

P0B38 is a generic powertrain code for “Motor Electronics Coolant Pump B Control Circuit/Open.” It indicates that the control circuit for pump B may be detected as open; it does not by itself confirm that the pump has failed.

Is P0B38 generic or manufacturer-specific?

P0B38 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0B38 works in the vehicle

The code points to an electrical control-circuit issue associated with a motor-electronics coolant pump. “Open” means the circuit may not be completing as expected. The code definition alone does not identify the cause or establish which vehicle systems or components are affected.

P0B38 symptoms

Depending on the vehicle and the underlying issue, there may be a warning light or message, changes in coolant-pump operation, or no obvious symptoms. These possibilities are not confirmed by the code alone.

Possible causes of P0B38

Possible causes include a wiring or connector problem, a control-circuit fault, or a pump issue. Further diagnosis is needed to determine whether any of these applies.

How to diagnose P0B38

  1. Check the vehicle’s service information for the meaning and diagnostic procedure specific to its make, model, and year.
  2. Use a compatible scan tool to record the code and related codes, along with available freeze-frame data.
  3. Have a qualified technician inspect the relevant pump-control wiring and connectors and test the circuit using the vehicle-specific procedure.
  4. Confirm the cause with test results before replacing parts; the code alone does not prove the pump is faulty.

How to fix P0B38

The repair depends on the confirmed cause and may involve addressing a circuit, connector, wiring, or pump issue. Because the code concerns motor-electronics cooling and some vehicles have high-voltage systems, use a qualified technician and do not attempt high-voltage repairs.

Can I drive with P0B38?

The code alone cannot establish whether continued driving is safe. Follow any vehicle warnings and the owner’s manual; if a temperature warning, reduced-power message, or other serious warning appears, stop when safe and seek professional advice.

P0B38 frequently asked questions

Does P0B38 mean the coolant pump has failed?

No. It identifies a possible open control circuit for pump B, but does not confirm a failed pump.

What does “open” mean in P0B38?

It means the control circuit may not be completing as expected. Testing is needed to locate the cause.

Can I keep driving with P0B38?

The code alone is not enough to determine that. Follow the vehicle’s warnings and manual, and seek professional guidance if serious warnings or symptoms occur.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.