Source-backed diagnostic reference

P0B92 Code: Meaning & Diagnostic Guide

Hybrid/EV Battery Voltage Sense R Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0B92 mean?

  • GENERIC: Hybrid/EV Battery Voltage Sense R Circuit Low Source
  • GENERIC: Hybrid/EV Battery Voltage Sense R Circuit Low Source

P0B92 quick answer

P0B92 is a generic hybrid/EV diagnostic trouble code meaning “Hybrid/EV Battery Voltage Sense R Circuit Low.” It indicates that the reported voltage signal for sense circuit R is low; it does not by itself identify a failed part.

Is P0B92 generic or manufacturer-specific?

P0B92 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0B92 works in the vehicle

A voltage-sense circuit monitors battery voltage and reports it to the vehicle’s control system. “Circuit low” describes a signal below the expected range. The code alone does not establish whether the battery voltage itself is low or whether there is an issue in the sensing circuit.

P0B92 symptoms

Symptoms depend on the vehicle and the underlying condition. A warning light or hybrid-system message may be present, but the code evidence does not confirm any particular symptom.

Possible causes of P0B92

The code identifies a low voltage-sense signal, not its cause. Further diagnosis is needed to determine whether the reading reflects a battery condition, a sensing-circuit issue, or another vehicle-specific factor.

How to diagnose P0B92

  1. Confirm the code with a suitable scan tool and record any other codes and available freeze-frame data.
  2. Check the vehicle’s service information for the specific meaning and diagnostic procedure for sense circuit R.
  3. Have a qualified hybrid/EV technician evaluate the battery voltage readings and sensing circuit using vehicle-specific procedures.
  4. Do not probe, disconnect, or repair high-voltage components yourself.

How to fix P0B92

The appropriate repair depends on the diagnosis; P0B92 alone does not confirm a failed battery or other component. Use vehicle-specific service information and have high-voltage diagnosis or repairs performed by a qualified technician.

Can I drive with P0B92?

The code alone cannot determine whether the vehicle is safe to drive. Follow any dashboard warnings and the owner’s manual; if the vehicle shows severe warnings, reduced power, or unusual behavior, stop when safe and seek professional assistance.

P0B92 frequently asked questions

What does P0B92 mean?

It means the hybrid/EV battery voltage-sense R circuit is reporting a low signal.

Does P0B92 prove the battery has failed?

No. The code identifies a low voltage-sense signal but does not confirm a failed battery or any other component.

Can I diagnose or repair P0B92 myself?

Basic code information can be read with a suitable scan tool, but diagnosis involving high-voltage components should be left to a qualified hybrid/EV technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.