Source-backed diagnostic reference

P0B93 Code: Meaning & Diagnostic Guide

Hybrid/EV Battery Voltage Sense R Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0B93 mean?

  • GENERIC: Hybrid/EV Battery Voltage Sense R Circuit High Source
  • GENERIC: Hybrid/EV Battery Voltage Sense R Circuit High Source

P0B93 quick answer

P0B93 is a generic hybrid/EV diagnostic trouble code meaning “Hybrid/EV Battery Voltage Sense R Circuit High.” It indicates that the voltage-sense signal for circuit R is above the expected range; it does not by itself confirm which part has failed.

Is P0B93 generic or manufacturer-specific?

P0B93 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0B93 works in the vehicle

The code refers to a battery voltage-sensing circuit. “High” describes the signal reported by that circuit, not necessarily a battery that is overcharged or producing excessive voltage. The code definition alone does not identify a specific cause or failed component.

P0B93 symptoms

A vehicle may show a warning light or hybrid/EV system message, or it may have no obvious symptoms. The supplied evidence does not establish particular symptoms.

Possible causes of P0B93

Possible areas for diagnosis include the voltage-sensing circuit, its connections, or related control-system readings. These are possibilities, not confirmed causes; the code alone does not identify a failed part.

How to diagnose P0B93

  1. Record the code and any other stored codes or warning messages before clearing anything.
  2. Use vehicle-specific service information and a compatible scan tool to review relevant fault details and available voltage-sense data.
  3. Have a qualified technician inspect accessible low-voltage wiring and connectors related to the sensing circuit for visible damage or poor connections.
  4. If the cause is not clear, have a technician perform vehicle-specific circuit tests using the correct procedures and equipment.

How to fix P0B93

Address the cause confirmed by diagnosis rather than replacing a component based on P0B93 alone. Hybrid and EV battery systems can contain hazardous high voltage; leave battery-pack access and high-voltage testing or repair to a qualified technician.

Can I drive with P0B93?

The code definition alone cannot determine whether the vehicle is safe to drive. Follow any vehicle warnings and the owner’s manual; if a warning indicates a serious fault, performance is abnormal, or you are unsure, stop in a safe place and contact qualified service.

P0B93 frequently asked questions

Does P0B93 mean the battery is overcharged?

Not necessarily. “Circuit high” describes a voltage-sense signal above its expected range; it does not by itself prove that the battery voltage is too high.

Does P0B93 identify a failed battery or sensor?

No. The generic definition identifies a voltage-sensing circuit condition, not a confirmed failed component.

Can I clear P0B93 and keep driving?

Clearing the code does not establish or fix its cause. Driving advice depends on the vehicle’s warnings and condition, so consult the owner’s manual or a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.