P0C25 Code: Meaning & Diagnostic Guide
Electric/Auxiliary Transmission Fluid Pump Control Module Circuit High
What does P0C25 mean?
P0C25 quick answer
P0C25 is a generic diagnostic trouble code for “Electric/Auxiliary Transmission Fluid Pump Control Module Circuit High.” It indicates that the control circuit’s signal or voltage was detected as higher than expected; the code alone does not identify a failed part.
Is P0C25 generic or manufacturer-specific?
P0C25 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P0C25 works in the vehicle
The code refers to the electrical circuit associated with an electric or auxiliary transmission-fluid pump control module. “Circuit high” describes an electrical reading outside the expected range, not necessarily a pump that has failed. The vehicle’s service information and test results are needed to narrow down the cause.
P0C25 symptoms
Possible signs may include a warning light, a transmission-related message, or changes in transmission operation. A vehicle may have no obvious symptoms. These signs are not confirmed by the code alone.
Possible causes of P0C25
Possible explanations include a wiring or connector problem, a power or ground issue, a circuit fault, or a problem with the pump control module or related pump system. P0C25 by itself does not confirm any of these causes.
How to diagnose P0C25
- Record P0C25 and any other stored codes, along with the conditions present when they were set.
- Check the vehicle-specific service information for the code definition and diagnostic procedure.
- Have a qualified technician inspect the relevant wiring and connectors for damage, looseness, or corrosion.
- Use the specified diagnostic tests to check circuit readings and related components before replacing parts.
- If the vehicle has high-voltage components, leave inspection and repair to a technician qualified for that system.
How to fix P0C25
The correct repair depends on test results. A technician may need to address a wiring, connection, power or ground issue, or a confirmed component fault. Do not replace the pump or control module based on P0C25 alone.
Can I drive with P0C25?
The code alone cannot establish whether the vehicle is safe to drive. If transmission operation changes, a warning appears, or the vehicle behaves abnormally, stop when safe and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s warnings and manual.
P0C25 frequently asked questions
What does P0C25 mean?
P0C25 is a generic code for an electric or auxiliary transmission-fluid pump control module circuit reading that is higher than expected.
Does P0C25 mean the transmission pump has failed?
No. The code identifies a circuit condition and does not, by itself, confirm a failed pump or control module.
Can I diagnose P0C25 from the code alone?
No. The code needs to be interpreted alongside other codes, vehicle-specific service information, and circuit test results.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.