Source-backed diagnostic reference

P0E42 Code: Meaning & Diagnostic Guide

Charge Status Indicator B Control Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P0E42 mean?

  • GENERIC: Charge Status Indicator B Control Circuit High Source
  • GENERIC: Charge Status Indicator B Control Circuit High Source

P0E42 quick answer

P0E42 is a generic diagnostic trouble code for “Charge Status Indicator B Control Circuit High.” It indicates that the vehicle detected a signal higher than expected in that control circuit; the code alone does not identify a failed part.

Is P0E42 generic or manufacturer-specific?

P0E42 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P0E42 works in the vehicle

P0E42 is a powertrain-related (P) code. “Circuit high” means the measured electrical signal was above the expected range. The exact meaning of “Charge Status Indicator B” and the diagnostic procedure can vary by vehicle, so check the service information for the specific make and model.

P0E42 symptoms

Possible signs include a charge-status indicator that behaves unexpectedly or a warning message. Some vehicles may show no obvious symptoms. These are possibilities, not confirmed effects of the code.

Possible causes of P0E42

Possible causes include a wiring or connector problem, an electrical signal issue, or a fault in a related control or indicator component. P0E42 by itself does not confirm which, if any, of these is responsible.

How to diagnose P0E42

  1. Record all stored codes and available freeze-frame data before clearing anything.
  2. Check the vehicle’s service information for the exact definition and test procedure for P0E42.
  3. Have a qualified technician inspect the relevant connectors and wiring for visible damage, loose connections, or corrosion.
  4. Use the vehicle-specific diagnostic procedure to test the circuit and related components; avoid guessing at a replacement part.
  5. If the code returns after testing or repair, have the system diagnosed by a qualified repair facility.

How to fix P0E42

The correct repair depends on vehicle-specific testing. A technician may need to address a wiring, connector, circuit, or related component issue. Do not replace parts based on the code alone, and do not attempt high-voltage system repairs without appropriate qualifications and equipment.

Can I drive with P0E42?

The code alone does not establish whether the vehicle is safe to drive. Follow any dashboard warnings and the owner’s manual. If charging behavior is abnormal, a warning indicates a serious fault, or the vehicle’s performance changes, stop when safe and seek qualified assistance.

P0E42 frequently asked questions

What does code P0E42 mean?

P0E42 is the generic code for “Charge Status Indicator B Control Circuit High,” indicating a signal above the expected range in that control circuit.

Does P0E42 identify a failed component?

No. The code describes a detected circuit condition; vehicle-specific diagnosis is needed to identify the cause.

Can I keep driving with P0E42?

The code alone cannot determine whether driving is safe. Consider any warnings or abnormal charging behavior, consult the owner’s manual, and seek qualified advice.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.