Source-backed diagnostic reference

P105422 Code: Meaning & Diagnostic Guide

Mack service information lists TECU P1054-22 for the tank air pressure sensor (SEPrSA). It describes the fault condition as air pressure above 1 mPa (145 psi); erratic clutch performance is an observable symptom. The document does not establish applicability to a 2021+ BEV or PHEV.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P105422 mean?

  • GENERIC: Mack service information lists TECU P1054-22 for the tank air pressure sensor (SEPrSA). It describes the fault condition as air pressure above 1 mPa (145 psi); erratic clutch performance is an observable symptom. The document does not establish applicability to a 2021+ BEV or PHEV. Source

P105422 quick answer

P105422 is a diagnostic trouble code whose meaning can depend on the vehicle and manufacturer. In the cited Mack service information, TECU code P1054-22 concerns tank air pressure above a reported threshold of 145 psi. That reference does not confirm applicability to 2021-or-newer BEVs or PHEVs.

Is P105422 generic or manufacturer-specific?

P105422 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P105422 works in the vehicle

The cited service information associates P1054-22 with the tank air pressure sensor, identified as SEPrSA. It describes the fault condition as pressure above 1 mPa (145 psi); the notation and pressure value appear inconsistent, so confirm the correct specification in vehicle-specific service information. This reference alone does not establish a failed sensor or identify which vehicles use this code.

P105422 symptoms

Erratic clutch performance is listed as an observable symptom in the cited service information. It is a possible clue, not a symptom that every vehicle with P105422 will have.

Possible causes of P105422

The reference describes a high tank-air-pressure condition but does not confirm its underlying cause. Depending on the vehicle, a technician may need to check the pressure reading, sensor signal, wiring, and related pneumatic system before identifying a fault.

How to diagnose P105422

  1. Confirm the exact code and retrieve vehicle-specific service information; code definitions may vary by manufacturer.
  2. Check whether the cited procedure applies to the vehicle, especially for a BEV or PHEV, which the reference does not cover.
  3. Have a qualified technician compare the reported tank pressure with the correct specification and verify the sensor signal and circuit.
  4. Inspect related pneumatic components and connections using the manufacturer’s approved diagnostic procedure.
  5. Do not replace a sensor or other component based on the code alone; confirm the fault first.

How to fix P105422

The reference does not establish a confirmed failed component or a specific repair. Repair should follow diagnosis and the correct service information for the vehicle. Do not attempt high-voltage work; BEV and PHEV systems require appropriately qualified service personnel.

Can I drive with P105422?

The reference gives no universal driving recommendation. If clutch operation is erratic or vehicle behavior is affected, stop somewhere safe and arrange a professional assessment. Otherwise, consult vehicle-specific guidance and have the code diagnosed promptly.

P105422 frequently asked questions

What does P105422 mean?

Its meaning can depend on the vehicle. The cited Mack service information lists TECU P1054-22 for a tank air pressure sensor condition involving pressure above a reported 145 psi threshold.

Does P105422 prove the tank air pressure sensor has failed?

No. The reference describes a pressure-related fault condition but does not confirm a failed sensor. Diagnosis should verify pressure, sensor readings, and the relevant circuit.

Can P105422 cause erratic clutch performance?

Erratic clutch performance is listed as an observable symptom in the cited service information, but it is not established as a universal symptom.

Does this code description apply to every BEV or PHEV?

No such applicability is established by the supplied reference. Confirm the code definition and diagnostic procedure for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.