P1104 Code: Meaning & Diagnostic Guide
Mass Air Flow Sensor Circuit Ground
What does P1104 mean?
P1104 quick answer
P1104 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with different possibilities, including a mass airflow (MAF) sensor ground issue, a turbocharger wastegate solenoid, an engine torque control signal circuit, or an oxygen-sensor voltage/air-leak description. Confirm the meaning for the exact vehicle before diagnosing.
Is P1104 generic or manufacturer-specific?
P1104 currently has manufacturer-labelled reference definitions for JAGUAR, MITSUBISHI, OTHER, SUBARU, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1104 works in the vehicle
P1 codes are generally manufacturer-controlled, rather than having one universal definition. In the supplied reference data, P1104 has several differing descriptions. A MAF ground description points to the sensor’s electrical ground circuit; a wastegate-solenoid description concerns turbocharger control; and the other descriptions refer to an engine torque-control signal or an oxygen-sensor reading and possible air leak. These are reference-listed interpretations, not confirmed faults on any particular vehicle.
P1104 symptoms
Symptoms depend on the vehicle and the code’s applicable definition. Possible signs could include a check-engine light, changes in engine performance, or drivability concerns, but the evidence does not establish that any symptom will occur.
Possible causes of P1104
Possible causes depend on the vehicle-specific definition and test results. They may involve wiring or connections, a sensor or control circuit, a wastegate-control component, or an air leak. P1104 alone does not confirm a failed part.
How to diagnose P1104
- Record the vehicle’s make, model, year, engine, and any other stored codes.
- Use reliable service information or a scan tool that supports the vehicle to confirm the manufacturer-specific definition of P1104.
- Note freeze-frame data and relevant live readings before clearing codes; these can help show the conditions when the code appeared.
- Inspect the wiring, connectors, and related hoses for visible damage or disconnection, guided by the confirmed code definition.
- Follow the vehicle’s diagnostic procedure and test results before replacing components; seek a qualified technician if the cause is unclear.
How to fix P1104
There is no single repair for P1104 across all vehicles. Repair only the issue confirmed by vehicle-specific testing, such as a verified connection, wiring, leak, or component fault. Avoid replacing parts based only on the code description.
Can I drive with P1104?
The code alone does not establish whether driving is safe. Check the owner’s manual and consider the vehicle’s behavior. If the engine runs poorly, loses power, overheats, or displays a warning requiring you to stop, pull over safely and arrange professional assistance. If it drives normally, arrange diagnosis promptly and avoid demanding driving until the meaning is confirmed.
P1104 frequently asked questions
Does P1104 mean the same thing on every vehicle?
No. P1104 is manufacturer-specific, and the supplied references show several different definitions. Confirm the definition for the exact vehicle.
Does P1104 prove that a sensor or other part has failed?
No. It identifies a code condition, not a confirmed failed component. Diagnosis is needed before choosing a repair.
Can I keep driving with P1104?
The code alone cannot determine that. Consider warning lights and how the vehicle runs, follow the owner’s manual, and seek assistance if performance is significantly affected or a stop warning appears.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.