Source-backed diagnostic reference

P1107 Code: Meaning & Diagnostic Guide

BARO Circuit Low Input

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1107 mean?

  • ACURA: BARO Circuit Low Input Source
  • BUICK: MAP Sensor Circuit Intermittent Low Voltage Source
  • CADILLAC: MAP Sensor Circuit Intermittent Low Voltage Source
  • CHEVY: MAP Sensor Circuit Intermittent Low Voltage Source
  • CHRYSLER: MAP Sensor Circuit Intermittent Low Voltage Source
  • FORD: Dual Alternator Lower Circuit Malfunction Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent Low Voltage Source
  • GM: MAP Sensor Circuit Intermittent Low Voltage Source
  • GMC: MAP Sensor Circuit Intermittent Low Voltage Source
  • HONDA: BARO Circuit Low Input Source
  • INFINITI: BARO Circuit Low Input Source
  • LINCOLN: Dual Alternator Lower Circuit Malfunction Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent Low Voltage Source
  • MERCURY: Dual Alternator Lower Circuit Malfunction Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent Low Voltage Source
  • OLDSMOBILE: MAP Sensor Circuit Intermittent Low Voltage Source
  • OTHER: Dual Alternator Lower Circuit Malfunction/ Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent Low Voltage Source
  • SATURN: MAP Sensor Circuit Intermittent Low Voltage Source
  • SUBARU: AIR System Diagnosis Solenoid Circuit Fault Source
  • VOLKSWAGEN: Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Short To B+ Source

P1107 quick answer

P1107 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. Reference descriptions include a low or intermittent voltage in the MAP sensor circuit or a low BARO circuit input. Check the code definition for the exact make, model, year, and engine before diagnosing.

Is P1107 generic or manufacturer-specific?

P1107 currently has manufacturer-labelled reference definitions for ACURA, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1107 works in the vehicle

The MAP sensor measures pressure in the intake manifold; the BARO sensor measures atmospheric pressure. A low or intermittent circuit input means the engine computer detected a signal that was lower than expected or unstable. P1107 alone does not identify a confirmed failed part.

P1107 symptoms

Some vehicles may show a check-engine light with few noticeable changes. Depending on the vehicle and the underlying issue, possible symptoms can include rough running, hesitation, reduced power, or changes in fuel economy. These symptoms are not specific to P1107.

Possible causes of P1107

Possible causes include a loose or damaged connector, wiring problems, a sensor fault, or an issue with the circuit's power, ground, or signal. The correct possibilities depend on the vehicle-specific code definition and test results.

How to diagnose P1107

  1. Confirm the P1107 definition using reliable service information for the exact vehicle.
  2. Scan for other stored codes and note when the code was set, if that information is available.
  3. With the engine off, visually check the relevant sensor connector and accessible wiring for looseness or damage.
  4. Use vehicle-specific diagnostic procedures to check the sensor signal and its power and ground circuits.
  5. Compare test results with the manufacturer's specifications before deciding whether a repair is needed.

How to fix P1107

Repair should follow the confirmed cause. This may involve correcting a connector or wiring issue or replacing a component only if testing shows it has failed. Avoid replacing a MAP or BARO sensor based on P1107 alone; consult vehicle-specific service information or a qualified technician.

Can I drive with P1107?

Driving impact depends on the vehicle and symptoms. If the vehicle runs normally, arrange diagnosis soon and monitor for changes. If it stalls, loses substantial power, or runs roughly, stop somewhere safe and seek professional help rather than continuing to drive.

P1107 frequently asked questions

What does P1107 mean?

It is a manufacturer-specific code. Depending on the vehicle, it can refer to a low or intermittent MAP sensor circuit signal or a low BARO circuit input.

Does P1107 prove the sensor is bad?

No. Wiring, connector, power, or ground problems can also affect the signal. Testing is needed to identify the cause.

Can I keep driving with P1107?

It depends on how the vehicle behaves. Arrange diagnosis, and stop driving if you experience stalling, substantial power loss, or rough running.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.