P1113 Code: Meaning & Diagnostic Guide
Intake Resonance Switchover Valve Circuit
What does P1113 mean?
- BUICK: Intake Resonance Switchover Valve Circuit Source
- CADILLAC: Intake Resonance Switchover Valve Circuit Source
- CHEVY: Intake Resonance Switchover Valve Circuit Source
- CHRYSLER: Intake Resonance Switchover Valve Circuit Source
- GM: Intake Resonance Switchover Valve Circuit Source
- GMC: Intake Resonance Switchover Valve Circuit Source
- MAZDA: Intake Air Temperature Sensor Signal Dynamic Chamber Circuit Source
- OLDSMOBILE: Intake Resonance Switchover Valve Circuit Source
- OTHER: IAT Sensor Open/Short Source
- SATURN: Intake Resonance Switchover Valve Circuit Source
- VOLKSWAGEN: Oxygen Sensor Heater Resistance Too High Bank 1 Sensor 1 Source
P1113 quick answer
P1113 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied reference lists intake resonance valve circuit, intake air temperature signal circuit, and oxygen sensor heater circuit interpretations. Confirm the definition for your vehicle before diagnosing or replacing parts.
Is P1113 generic or manufacturer-specific?
P1113 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, GM, GMC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1113 works in the vehicle
A diagnostic trouble code (DTC) is a code stored by a vehicle’s control module. P1113 does not have one consistent meaning across the supplied applications: it may refer to an intake resonance switchover valve circuit, an intake air temperature sensor signal circuit, or an oxygen sensor heater circuit. A circuit code points to an electrical system or its monitored operation; it does not by itself identify a failed component.
P1113 symptoms
Symptoms depend on which P1113 definition applies and whether the code is current. The check-engine light may be on; other symptoms cannot be determined from this code reference alone.
Possible causes of P1113
Possible causes depend on the vehicle-specific definition and test results. They may involve wiring, connectors, the named circuit or device, or a control issue. The code alone does not confirm a particular cause or failed part.
How to diagnose P1113
- Identify the vehicle’s year, make, model, engine, and market, then confirm P1113’s definition in reliable service information for that exact application.
- Use a compatible scan tool to record stored codes and freeze-frame data before clearing anything.
- Follow the vehicle-specific diagnostic procedure to check the relevant circuit, connectors, wiring, and component; do not assume the code names a confirmed failure.
- If the definition or test procedure is unclear, have a qualified technician diagnose it.
How to fix P1113
Base repairs on the confirmed vehicle-specific definition and diagnostic results. Repair or replace only a component or wiring fault that testing identifies, then verify the repair according to service information. Avoid parts replacement based on the code alone.
Can I drive with P1113?
The code reference alone cannot establish whether the vehicle is safe to drive. Check the owner’s manual and seek prompt professional advice if warning lights, drivability problems, or other concerning symptoms occur.
P1113 frequently asked questions
What does P1113 mean?
Its meaning varies by vehicle. The supplied reference associates it with different intake, temperature-sensor, and oxygen-sensor-heater circuits, so verify the definition for the exact application.
Does P1113 mean a sensor or valve has failed?
No. It identifies a monitored code condition, not a confirmed failed part. Vehicle-specific testing is needed to find the cause.
Can I clear P1113 without diagnosing it?
Clearing a code does not address its cause and may erase useful diagnostic information. Record the code and related data first, then diagnose it using the correct vehicle-specific procedure.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.