Source-backed diagnostic reference

P1123 Code: Meaning & Diagnostic Guide

Pedal Position Sensor 1 High Input

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1123 mean?

  • BMW: Pedal Position Sensor 1 High Input Source
  • FORD: Throttle Position Sensor In Range But Higher Than Expected Source
  • JAGUAR: Pedal Position Sensor A Circuit High Input Source
  • KIA: Long Term Fuel Trim Adaptive Air System Low Source
  • LINCOLN: Throttle Position Sensor In Range But Higher Than Expected Source
  • MAZDA: Throttle Position Stuck Open Source
  • MERCURY: Throttle Position Sensor In Range But Higher Than Expected Source
  • OTHER: Throttle Position Sensor In Range But Higher Than Expected Source
  • VOLKSWAGEN: Long Term Fuel Trim Add Air Bank 1 System Too Rich Source

P1123 quick answer

P1123 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. It may indicate a throttle- or accelerator-pedal position signal that is higher than expected, but some manufacturers use it for fuel-trim or other conditions. Check the code definition for the exact make, model, year, and engine before diagnosing.

Is P1123 generic or manufacturer-specific?

P1123 currently has manufacturer-labelled reference definitions for BMW, FORD, JAGUAR, KIA, LINCOLN, MAZDA and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1123 works in the vehicle

The code’s description is not consistent across manufacturers. Reference listings associate P1123 with throttle position readings that are higher than expected, pedal-position circuit high input, a throttle position reported as stuck open, and certain fuel-trim conditions. “High input” means the control module detected a signal voltage or reported value above its expected range; it does not by itself identify a failed part.

P1123 symptoms

Depending on the vehicle and the underlying condition, possible signs may include a warning light, altered throttle response, reduced power, rough running, or changes in fuel economy. Some vehicles may show no obvious symptoms. These signs do not confirm the cause of P1123.

Possible causes of P1123

Possible causes depend on the vehicle-specific definition and may include a sensor signal outside its expected range, a connector or wiring issue, throttle-system concerns, or an air/fuel-trim problem. The code alone does not confirm a faulty sensor or any other component.

How to diagnose P1123

  1. Confirm the exact P1123 definition using reliable service information for the vehicle’s make, model, year, and engine.
  2. Record all stored codes and available freeze-frame data before clearing anything; related codes can help narrow the diagnosis.
  3. Check for visible damage, loose connections, corrosion, or wiring problems in the circuits relevant to the vehicle-specific definition.
  4. Use an appropriate scan tool and the manufacturer’s diagnostic procedure to compare sensor readings with specified values and observe whether they change as expected.
  5. If the code relates to fuel trim or air intake, follow the vehicle-specific procedure to assess those systems rather than assuming a throttle or pedal sensor fault.
  6. Have a qualified technician perform further electrical testing when the cause is not clear; avoid replacing parts based on the code alone.

How to fix P1123

The correct repair depends on the confirmed vehicle-specific cause. It may involve addressing a connection or wiring fault, repairing a related system, or replacing a component only after testing supports that decision. Use the applicable service procedure and verify that the code does not return after repair.

Can I drive with P1123?

Driving impact varies by vehicle and symptoms. If throttle response or engine power is unpredictable, reduced, or unsafe, stop driving when it is safe to do so and arrange professional assistance. If the vehicle behaves normally, consult the owner’s manual and have the code checked promptly; a code alone cannot establish that continued driving is safe.

P1123 frequently asked questions

What does P1123 mean?

P1123 has different definitions across manufacturers. It can refer to a throttle or pedal-position signal that is higher than expected, but it may describe another condition on some vehicles.

Does P1123 mean the throttle position sensor has failed?

No. The code reports a detected condition, not a confirmed failed part. Vehicle-specific testing is needed to identify the cause.

Can I keep driving with P1123?

That depends on the vehicle and how it runs. If power or throttle response is abnormal or unpredictable, stop when safe and seek assistance; otherwise, arrange diagnosis promptly and follow the owner’s manual.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.