Source-backed diagnostic reference

P1135 Code: Meaning & Diagnostic Guide

Pedal Position Sensor A Circuit Intermittent

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1135 mean?

  • BMW: O2 Sensor Heater Circuit Low Voltage Bank 1 Sensor 1 Source
  • BUICK: HO2S Lean Average Bank 1 Sensor 1 Source
  • CADILLAC: HO2S Lean Average Bank 1 Sensor 1 Source
  • CHEVY: HO2S Lean Average Bank 1 Sensor 1 Source
  • CHRYSLER: HO2S Lean Average Bank 1 Sensor 1 Source
  • FORD: Pedal Position Sensor A Circuit Intermittent Source
  • GM: HO2S Lean Average Bank 1 Sensor 1 Source
  • GMC: HO2S Lean Average Bank 1 Sensor 1 Source
  • LEXUS: Air/Fuel Ratio Sensor Heater Circuit Malfunction Bank 1 Sensor 1 Source
  • LINCOLN: Pedal Position Sensor A Circuit Intermittent Source
  • MAZDA: HO2S Bank 1 Sensor 1 Heater Circuit Low Input Source
  • MERCURY: Pedal Position Sensor A Circuit Intermittent Source
  • NISSAN: Intake Valve Timing Control Circuit Bank 2 Source
  • OLDSMOBILE: HO2S Lean Average Bank 1 Sensor 1 Source
  • OTHER: Pedal Position Sensor A Circuit Intermittent Source
  • SATURN: HO2S Lean Average Bank 1 Sensor 1 Source
  • TOYOTA: Air/Fuel Sensor Heater Circuit Response Bank 1 Sensor 1 Source
  • VOLKSWAGEN: Oxygen Sensor Heating Circuit Bank 1 + 2 Sensor 2 Electrical Malfunction Source
  • GENERIC: Pedal Position Sensor A Circuit Intermittent Source

P1135 quick answer

P1135 generically means “Pedal Position Sensor A Circuit Intermittent.” The exact meaning varies by vehicle make and model, so confirm the manufacturer-specific definition before diagnosing or replacing parts.

Is P1135 generic or manufacturer-specific?

P1135 has a generic source-backed definition in this database, with additional manufacturer-labelled references for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1135 works in the vehicle

A diagnostic trouble code (DTC) is a message stored by a vehicle’s computer. “Intermittent” means a signal or circuit may be cutting in and out rather than failing continuously. P1135 is manufacturer-specific: the supplied references also associate it with oxygen-sensor or air/fuel-ratio sensor circuits and, for Nissan, intake valve timing control. The generic description alone does not identify the fault on a particular vehicle.

P1135 symptoms

Symptoms depend on the vehicle-specific meaning and may be absent. Possible signs include a check-engine light, changes in engine response, or drivability concerns. These symptoms do not confirm a failed sensor or component.

Possible causes of P1135

Possible causes depend on the vehicle and its code definition. An intermittent circuit description can involve a loose or damaged connection, wiring, power supply, or the relevant sensor or control system. Diagnosis is needed to determine whether any of these applies.

How to diagnose P1135

  1. Confirm the vehicle’s year, make, model, engine, and the exact code description from a vehicle-specific scan tool or reliable service information.
  2. Check for other stored codes and note when the fault occurs; related codes and conditions can help narrow the diagnosis.
  3. Have the relevant circuit inspected and tested using the vehicle’s service procedure, including its connectors and wiring.
  4. Use scan data and test results to identify the cause before replacing parts; seek a qualified technician if the diagnosis requires specialist equipment.

How to fix P1135

There is no single repair for P1135 across all vehicles. The repair should follow the vehicle-specific definition and test results; do not replace a sensor based only on the code.

Can I drive with P1135?

Driving advice depends on the vehicle and any symptoms. If engine response is impaired, the vehicle runs poorly, or warning lights indicate a serious issue, stop somewhere safe and arrange professional advice. If there are no noticeable symptoms, have the code checked promptly and consult the owner’s manual.

P1135 frequently asked questions

What does P1135 mean?

Its generic definition is “Pedal Position Sensor A Circuit Intermittent,” but the meaning can differ by manufacturer and vehicle.

Does P1135 always mean the pedal position sensor is faulty?

No. The code description varies by vehicle, and even an intermittent-circuit description does not by itself prove that a sensor has failed.

Can I diagnose P1135 with a basic code reader?

A basic reader may show the code, but vehicle-specific code information and circuit testing may be needed to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.