Source-backed diagnostic reference

P1137 Code: Meaning & Diagnostic Guide

O2 Sensor Heater Circuit Signal Intermittent Bank 1 Sensor 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1137 mean?

  • BMW: O2 Sensor Heater Circuit Signal Intermittent Bank 1 Sensor 2 Source
  • BUICK: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • CADILLAC: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • CHEVY: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • CHRYSLER: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • FORD: Lack of Downstream Heated Oxygen Sensor Switch Sensor Indicates Lean Bank 1 Source
  • GM: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • GMC: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • JAGUAR: Lack Of HO2S12 Switches Sensor Indicates Lean Source
  • LINCOLN: Lack of Downstream Heated Oxygen Sensor Switch Sensor Indicates Lean Bank 1 Source
  • MAZDA: HO2S Bank 1 Sensor 2 Not Switching Fuel Control Limit Reached Source
  • MERCURY: Lack of Downstream Heated Oxygen Sensor Switch Sensor Indicates Lean Bank 1 Source
  • OLDSMOBILE: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • OTHER: Lack Of HO2S Switch - Sensor Indicates Lean Source
  • SATURN: HO2S Bank 1 Sensor 2 Lean Or Low Voltage Source
  • SUBARU: Front Oxygen AF Sensor Circuit Range Performance Problem Source
  • VOLKSWAGEN: Long Term Fuel Trim Add Fuel Bank 1 System Too Rich Source

P1137 quick answer

P1137 is a manufacturer-specific powertrain code, so its exact meaning depends on the vehicle. The supplied definitions commonly describe a downstream oxygen-sensor signal that appears lean, low, or fails to switch; one definition instead identifies an intermittent heater-circuit signal.

Is P1137 generic or manufacturer-specific?

P1137 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1137 works in the vehicle

An oxygen sensor measures oxygen in the exhaust, helping the engine computer assess air-fuel conditions. “Bank 1” is the side containing cylinder 1; “Sensor 2” usually means the sensor after the catalytic converter. A lean or low-voltage reading means the signal suggests excess oxygen, but does not by itself prove the engine is actually running lean. Check the vehicle-specific code definition before interpreting P1137.

P1137 symptoms

Depending on the vehicle and underlying issue, the check-engine light may be on. Changes in fuel economy, emissions, idle quality, or drivability are possible, but symptoms may be absent.

Possible causes of P1137

Possibilities depend on the vehicle and its code definition. They may include an oxygen sensor or heater-circuit issue, damaged wiring or a connector problem, an exhaust leak, or an air-fuel condition that affects the sensor reading. The code alone does not confirm a failed sensor or other component.

How to diagnose P1137

  1. Confirm the exact P1137 definition for the vehicle’s year, make, model, and engine.
  2. Read all stored and pending codes and review available freeze-frame data before clearing anything.
  3. Check the relevant sensor’s live data and compare it with manufacturer service information.
  4. Inspect the sensor wiring, connector, and nearby exhaust area for visible damage, loose connections, or leaks.
  5. Use vehicle-specific diagnostic tests to distinguish a sensor or circuit fault from an exhaust or air-fuel issue.

How to fix P1137

Base repairs on test results and the vehicle-specific service procedure. Repair confirmed wiring or exhaust problems, or replace a sensor only if testing supports it. Clear the code after repairs and verify whether it returns.

Can I drive with P1137?

The code alone does not establish whether the vehicle is safe to drive. If the engine runs poorly, the warning light flashes, or other serious symptoms appear, stop driving and seek professional help. Otherwise, arrange diagnosis promptly and follow the vehicle’s owner guidance.

P1137 frequently asked questions

Does P1137 always mean the oxygen sensor is bad?

No. Its meaning varies by vehicle, and the code does not by itself identify a failed component. Wiring, exhaust leaks, or an air-fuel issue may also need investigation.

What does Bank 1 Sensor 2 mean?

Bank 1 is the engine side containing cylinder 1. Sensor 2 usually refers to the oxygen sensor located after the catalytic converter.

Can I keep driving with P1137?

The code alone cannot determine drivability or safety. Consider the vehicle’s symptoms and owner guidance, and get the fault diagnosed rather than assuming the sensor is the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.