P1142 Code: Meaning & Diagnostic Guide
Fuel Restriction Condition
What does P1142 mean?
- FORD: Fuel Restriction Condition Source
- LINCOLN: Fuel Restriction Condition Source
- MAZDA: HO2S Bank 1 Sensor 2 Heater Circuit High Input Source
- MERCURY: Fuel Restriction Condition Source
- OTHER: Fuel Restriction Condition Source
- SUBARU: Mass Air Flow Sensor Circuit Low Input Source
- VOLKSWAGEN: Load Calculation Cross Check Lower Limit Exceeded Source
P1142 quick answer
P1142 is a manufacturer-specific diagnostic trouble code. The supplied generic listing describes it as a fuel restriction condition, but its meaning can differ by vehicle, so confirm the definition for your make, model, year, and engine before diagnosing.
Is P1142 generic or manufacturer-specific?
P1142 currently has manufacturer-labelled reference definitions for FORD, LINCOLN, MAZDA, MERCURY, OTHER, SUBARU and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1142 works in the vehicle
A diagnostic trouble code (DTC) is a code stored by a vehicle’s control module when it detects a condition outside expected limits. The supplied references also assign P1142 to other conditions for specific manufacturers, including an oxygen-sensor heater circuit, a mass-airflow sensor circuit, and a load-calculation check. The code alone does not identify a failed component.
P1142 symptoms
If P1142 refers to a fuel restriction on your vehicle, possible symptoms may include reduced power, hesitation, or difficult starting. Other symptoms may apply if the vehicle-specific definition is different; some vehicles may show a warning light without obvious drivability changes.
Possible causes of P1142
For a vehicle that defines P1142 as a fuel restriction condition, possible causes could involve restricted fuel flow or a related measurement or control issue. If the code has another vehicle-specific meaning, the relevant causes will differ. The code by itself does not confirm a cause or failed part.
How to diagnose P1142
- Confirm the vehicle’s make, model, year, engine, and the exact P1142 definition using reliable vehicle-specific service information.
- Scan for other stored codes and review freeze-frame data, which records vehicle conditions when the code was set.
- Use the confirmed definition to inspect and test the related systems according to the vehicle’s service procedures.
- If the definition or test results are unclear, have a qualified technician diagnose the vehicle before replacing parts.
How to fix P1142
Choose repairs only after the vehicle-specific meaning of P1142 is confirmed and testing identifies the underlying issue. Do not replace a fuel-system, sensor, or other component based on the code alone.
Can I drive with P1142?
Driving guidance depends on the vehicle and symptoms. If the vehicle has substantial power loss, stalls, or runs poorly, avoid continued driving and arrange professional assessment. If it appears to drive normally, have the code checked promptly and follow the vehicle’s owner information.
P1142 frequently asked questions
What does code P1142 mean?
The supplied generic listing describes P1142 as a fuel restriction condition, but the code has different definitions for some manufacturers. Check vehicle-specific service information.
Does P1142 confirm a restricted fuel system?
No. It may indicate a fuel restriction condition on some vehicles, but the code alone does not confirm a restriction or identify a failed part.
Can I keep driving with P1142?
It depends on the vehicle-specific code meaning and how the vehicle behaves. Reduced power, stalling, or poor running calls for prompt assessment and may make continued driving inadvisable.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.