P1153 Code: Meaning & Diagnostic Guide
Bank 2 Fuel Control Shifted Lean
What does P1153 mean?
- BMW: O2 Sensor Heater Circuit High Voltage Bank 2 Sensor 1 Source
- BUICK: HO2S Insufficient Switching Source
- CADILLAC: HO2S Insufficient Switching Source
- CHEVY: HO2S Insufficient Switching Source
- CHRYSLER: HO2S Insufficient Switching Source
- FORD: Bank 2 Fuel Control Shifted Lean Source
- GM: HO2S Insufficient Switching Source
- GMC: HO2S Insufficient Switching Source
- LEXUS: Air/Fuel Ratio Sensor Circuit Response Malfunction Bank 2 Sensor 1 Source
- LINCOLN: Bank 2 Fuel Control Shifted Lean Source
- MAZDA: Bank 2 Fuel Control Shifted Lean FAOSC Source
- MERCURY: Bank 2 Fuel Control Shifted Lean Source
- OLDSMOBILE: HO2S Insufficient Switching Source
- OTHER: Bank 2 Fuel Control Shifted Lean Source
- SATURN: HO2S Insufficient Switching Source
- TOYOTA: Air/Fuel Sensor Circuit Response Bank 1 Sensor 2 Source
- GENERIC: Bank 2 Fuel Control Shifted Lean Source
P1153 quick answer
P1153 generically means “Bank 2 Fuel Control Shifted Lean.” It indicates the engine computer detected a lean-shifted fuel-control condition on bank 2; it does not by itself identify the cause or prove a part has failed. The code’s exact meaning can vary by vehicle.
Is P1153 generic or manufacturer-specific?
P1153 has a generic source-backed definition in this database, with additional manufacturer-labelled references for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1153 works in the vehicle
Bank 2 is the side of the engine that does not contain cylinder 1. “Shifted lean” describes fuel-control data moving toward a lean condition—typically meaning too much air or too little fuel is being indicated or corrected for. P1153 has different manufacturer-specific definitions, so check the code description for the particular vehicle before diagnosing it.
P1153 symptoms
Some vehicles may have a check-engine light, rough running, hesitation, reduced performance, or changes in fuel economy. Others may show few noticeable symptoms. These are possibilities, not symptoms confirmed by the code alone.
Possible causes of P1153
Possible areas to investigate include an air or vacuum leak, fuel-delivery issues, an exhaust leak near a sensor, or an oxygen or air-fuel sensor circuit or response problem. The code alone does not confirm any of these causes or identify a failed component.
How to diagnose P1153
- Confirm the vehicle’s year, make, model, engine, and the manufacturer-specific description for P1153.
- Use a scan tool to record all stored and pending codes and freeze-frame data before clearing anything.
- Check for related codes and inspect relevant wiring, connectors, intake hoses, and vacuum lines for visible damage or disconnection.
- Have a qualified technician assess fuel-control data and sensor response under the vehicle-specific diagnostic procedure.
- Test suspected air, exhaust, fuel, or sensor-circuit issues before replacing parts.
How to fix P1153
Repair the cause confirmed by testing; do not replace a sensor based on P1153 alone. The correct procedure and component locations depend on the vehicle. If diagnosis requires work around hot exhaust components or electrical systems, use a qualified technician.
Can I drive with P1153?
The code alone cannot establish whether the vehicle is safe to drive. If the engine runs normally and the warning light is steady, arrange diagnosis soon and monitor for changes. If the light flashes, the engine runs very poorly, or there is loss of power or another serious warning, stop driving when it is safe and seek professional help.
P1153 frequently asked questions
What does P1153 mean?
Its generic definition is “Bank 2 Fuel Control Shifted Lean,” but the exact interpretation can vary by vehicle.
Does P1153 mean the oxygen sensor is bad?
No. Some vehicle-specific definitions involve oxygen or air-fuel sensor behavior, but the code alone does not confirm a failed sensor.
Can I keep driving with P1153?
Driving guidance depends on how the vehicle runs and whether other warnings are present. Seek prompt diagnosis, and stop if the engine runs very poorly, the warning light flashes, or power drops significantly.
Should I clear P1153 and see if it returns?
Record the codes and freeze-frame data first. Clearing the code without diagnosing the condition can remove useful information.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.