Source-backed diagnostic reference

P1164 Code: Meaning & Diagnostic Guide

HO2S11 Circuit Fault Bank 1 Sensor 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1164 mean?

  • ACURA: HO2S11 Circuit Fault Bank 1 Sensor 1 Source
  • BMW: Fuel Trim Adaptation Additive Per Ignition Bank 2 Low Source
  • BUICK: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • CADILLAC: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • CHEVY: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • CHRYSLER: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • GM: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • GMC: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • HONDA: HO2S11 Circuit Fault Bank 1 Sensor 1 Source
  • INFINITI: HO2S11 Circuit Fault Bank 1 Sensor 1 Source
  • OLDSMOBILE: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • SATURN: HO2S Bank 2 Sensor 3 Rich Or High Voltage Source
  • VOLKSWAGEN: Fuel Temperature Sensor Range Performance Source

P1164 quick answer

P1164 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied listings associate it with different oxygen-sensor, fuel-trim, and fuel-temperature descriptions. Check the code against the vehicle’s make, model, year, and engine before diagnosing it.

Is P1164 generic or manufacturer-specific?

P1164 currently has manufacturer-labelled reference definitions for ACURA, BMW, BUICK, CADILLAC, CHEVY, CHRYSLER and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1164 works in the vehicle

P1164 does not have one universal definition in the supplied evidence. Depending on the vehicle, it may refer to an oxygen-sensor circuit or reading, fuel-trim adaptation, or fuel-temperature sensor performance. An oxygen sensor measures oxygen in the exhaust; fuel trim is the engine computer’s adjustment to the fuel mixture. The exact description should be verified using vehicle-specific service information.

P1164 symptoms

Possible symptoms depend on what P1164 means for the vehicle and may include a check-engine light, changes in fuel economy, rough running, or no noticeable change. These symptoms are not established for every vehicle with this code.

Possible causes of P1164

Possible causes depend on the vehicle-specific definition. They may involve a sensor, its wiring or connector, an exhaust or fuel-mixture issue, or another condition affecting the reported reading. The code alone does not confirm a failed component.

How to diagnose P1164

  1. Confirm the vehicle’s make, model, year, engine, and exact code description using reliable vehicle-specific service information.
  2. Scan for other codes and record freeze-frame data, which captures engine conditions when the fault was detected.
  3. Use the confirmed code definition to check relevant live data and inspect related wiring and connectors for visible damage or poor connections.
  4. Test the suspected circuit or system according to the vehicle’s service procedure before replacing parts.
  5. Clear the code only after repairs or testing, then check whether it returns under appropriate conditions.

How to fix P1164

Repair depends on the confirmed vehicle-specific diagnosis. Address verified wiring, connection, sensor, or system faults as indicated by testing. Avoid replacing a sensor based only on P1164; consult a qualified technician if the definition or test procedure is unclear.

Can I drive with P1164?

Driving impact cannot be determined from P1164 alone. If the vehicle runs poorly, loses power, or shows other serious warning signs, stop when safe and seek professional advice. If it appears to operate normally, arrange diagnosis promptly and follow the vehicle’s owner’s manual.

P1164 frequently asked questions

What does P1164 mean?

Its meaning varies by manufacturer and vehicle. The supplied references associate it with several different sensor or fuel-control descriptions, so verify the definition for your exact vehicle.

Does P1164 mean an oxygen sensor has failed?

Not necessarily. Some listings connect the code with oxygen-sensor circuits or readings, but other listed meanings concern fuel trim or fuel temperature. Testing is needed to identify the cause.

Can I keep driving with P1164?

The code alone does not establish whether driving is safe. Consider how the vehicle behaves, consult the owner’s manual, and seek prompt diagnosis, especially if there are drivability problems or other warning signs.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.