Source-backed diagnostic reference

P1182 Code: Meaning & Diagnostic Guide

O2 Sensor Bank 1 Sensor 2 Open Circuit During Coast Down Fuel Cut-off

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1182 mean?

  • BMW: O2 Sensor Bank 1 Sensor 2 Open Circuit During Coast Down Fuel Cut-off Source
  • MAZDA: Fuel Shut Off Solenoid Circuit Source
  • OTHER: Fuel Shut Off Solenoid Malfunction Source
  • VOLKSWAGEN: Linear Oxygen Sensor Reference Voltage Short To Ground Source

P1182 quick answer

P1182 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with different oxygen-sensor circuit descriptions or a fuel shut-off solenoid fault; the code alone does not identify a confirmed failed part.

Is P1182 generic or manufacturer-specific?

P1182 currently has manufacturer-labelled reference definitions for BMW, MAZDA, OTHER, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1182 works in the vehicle

A diagnostic trouble code (DTC) is a message stored when a vehicle detects an operating condition outside expected limits. For P1182, check the vehicle’s make, model, year, engine, and service information before interpreting the description. An “open circuit” generally means the expected electrical path may be interrupted; a “short to ground” means a circuit may be contacting ground unexpectedly.

P1182 symptoms

Depending on the vehicle and the condition behind the code, there may be a check-engine light, changes in engine operation, or no obvious symptoms. These possibilities do not confirm a specific fault.

Possible causes of P1182

Possible explanations depend on the vehicle’s P1182 definition and may involve wiring, connectors, a sensor or solenoid circuit, or another related condition. The code by itself does not prove that any particular component has failed.

How to diagnose P1182

  1. Confirm the vehicle’s make, model, year, engine, and exact code description using a reliable scan tool or service information.
  2. Scan for other stored codes and note when the code was set and any available freeze-frame data.
  3. Use vehicle-specific diagnostic procedures to inspect relevant wiring and connectors for visible damage, looseness, or corrosion.
  4. Have circuit tests and component checks performed according to the manufacturer’s procedure; avoid replacing parts based only on the code description.

How to fix P1182

The repair depends on the verified cause and the vehicle-specific definition. A qualified technician can test the relevant circuit and components, repair confirmed wiring or connection faults, and verify the repair by rescanning. Do not assume the oxygen sensor or fuel shut-off solenoid needs replacement without testing.

Can I drive with P1182?

The code alone cannot establish whether driving is safe. Check the owner’s manual and seek prompt professional advice if the vehicle runs poorly, stalls, shows additional warnings, or has another noticeable change. If operation appears normal, arrange diagnosis rather than ignoring the warning.

P1182 frequently asked questions

Does P1182 mean the same thing on every vehicle?

No. The supplied references show different descriptions across manufacturers, so the vehicle’s exact details and service information are needed.

Does P1182 confirm a failed oxygen sensor or solenoid?

No. It indicates a detected condition, not a confirmed failed part. Testing is needed to identify the cause.

Can I clear P1182 without diagnosing it?

Clearing the code does not fix its cause. Record the code and available data first, then diagnose the vehicle-specific condition.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.