Source-backed diagnostic reference

P1203 Code: Meaning & Diagnostic Guide

Cylinder 3 Misfire

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1203 mean?

  • ACURA: Cylinder 3 Misfire Source
  • BUICK: (Alternative Fuel) Gas Mass Sensor Circuit High Frequency Source
  • CADILLAC: (Alternative Fuel) Gas Mass Sensor Circuit High Frequency Source
  • CHEVY: (Alternative Fuel) Gas Mass Sensor Circuit High Frequency Source
  • CHRYSLER: (Alternative Fuel) Gas Mass Sensor Circuit High Frequency Source
  • GM: Alternative Fuel Gas Mass Sensor Circuit High Frequency Source
  • GMC: Alternative Fuel Gas Mass Sensor Circuit High Frequency Source
  • HONDA: Cylinder 3 Misfire Source
  • INFINITI: Cylinder 3 Misfire Source
  • JAGUAR: Cylinder 3 Injector Circuit Open/Shorted Source
  • OLDSMOBILE: Alternative Fuel Gas Mass Sensor Circuit High Frequency Source
  • OTHER: Injector Circuit Open / Shorted - Cylinder #3 Source
  • SATURN: Alternative Fuel Gas Mass Sensor Circuit High Frequency Source
  • VOLKSWAGEN: Cylinder 3 Fuel Injector Circuit Electrical Malfunction Source

P1203 quick answer

P1203 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. A generic listing describes an open or shorted injector circuit for cylinder 3, but other listings assign it different meanings. Check the vehicle-specific service information before diagnosing it.

Is P1203 generic or manufacturer-specific?

P1203 currently has manufacturer-labelled reference definitions for ACURA, BUICK, CADILLAC, CHEVY, CHRYSLER, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1203 works in the vehicle

An open circuit is a break in an electrical path; a short is an unintended connection. The supplied references also associate P1203 with a cylinder 3 misfire or, on some vehicles, a high-frequency alternative-fuel gas-mass-sensor signal. These differences mean the code alone does not identify a failed part.

P1203 symptoms

Depending on the vehicle-specific meaning, possible symptoms may include rough running, reduced power, a warning light, or no obvious symptoms. A misfire-related interpretation may involve uneven engine operation, but the code listing alone does not establish that a misfire is occurring.

Possible causes of P1203

If the vehicle-specific definition points to an injector circuit, possible causes could include wiring or connector problems, an injector issue, or a control-circuit fault. If the code refers to a misfire or alternative-fuel sensor, the relevant causes differ. The supplied evidence does not confirm any failed component.

How to diagnose P1203

  1. Confirm the vehicle's year, make, model, engine, and fuel system, then look up P1203 in its service information.
  2. Scan for other stored codes and note when the code occurs; related codes can help narrow the diagnosis.
  3. Inspect relevant wiring and connectors for visible damage or loose connections, following vehicle-specific procedures.
  4. Use the manufacturer's diagnostic tests to check the circuit or system named by that vehicle's definition before replacing parts.
  5. If the meaning or testing procedure is unclear, have a qualified technician diagnose it.

How to fix P1203

The correct repair depends on the vehicle-specific definition and test results. Avoid replacing an injector, sensor, or other part based only on the code. Have any confirmed wiring or component fault repaired according to the vehicle's service procedures.

Can I drive with P1203?

The code alone does not establish whether the vehicle is safe to drive. If the engine runs poorly, loses power, or the warning light flashes, stop driving when safe and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle owner's manual.

P1203 frequently asked questions

Does P1203 always mean a cylinder 3 misfire?

No. Some supplied listings describe a cylinder 3 misfire, while others describe an injector circuit fault or an alternative-fuel sensor signal. Confirm the meaning for the specific vehicle.

Does P1203 identify a failed injector?

No. Even when the vehicle-specific definition refers to an injector circuit, diagnosis is needed to determine whether the issue is wiring, a connector, the injector, or another circuit fault.

Can I keep driving with P1203?

The code by itself cannot determine drivability. Use the vehicle's symptoms and owner's manual; seek prompt help if it runs poorly, loses power, or has a flashing warning light.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.