Source-backed diagnostic reference

P1204 Code: Meaning & Diagnostic Guide

Cylinder 4 Misfire

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1204 mean?

  • ACURA: Cylinder 4 Misfire Source
  • HONDA: Cylinder 4 Misfire Source
  • INFINITI: Cylinder 4 Misfire Source
  • JAGUAR: Cylinder 4 Injector Circuit Open/Shorted Source
  • OTHER: Injector Circuit Open / Shorted - Cylinder #4 Source
  • VOLKSWAGEN: Cylinder 4 Fuel Injector Circuit Electrical Malfunction Source

P1204 quick answer

P1204 is a manufacturer-dependent powertrain code. The supplied listings describe it either as a cylinder 4 misfire or as an electrical fault in the cylinder 4 fuel-injector circuit. Check the vehicle’s make, model, year, and service information before interpreting the code; it does not by itself confirm a failed part.

Is P1204 generic or manufacturer-specific?

P1204 currently has manufacturer-labelled reference definitions for ACURA, HONDA, INFINITI, JAGUAR, OTHER, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1204 works in the vehicle

A misfire means a cylinder is not contributing power as expected. An injector-circuit electrical fault means the engine computer has detected an open or shorted electrical path associated with that injector. These are different interpretations of P1204 in the supplied evidence, so the correct meaning depends on the vehicle.

P1204 symptoms

Depending on the vehicle and underlying issue, possible symptoms include rough running, hesitation, reduced power, increased fuel use, or an illuminated check-engine light. A stored code may also appear without obvious symptoms.

Possible causes of P1204

Possible explanations depend on which definition applies. A misfire can have several causes, including ignition, fuel-delivery, or engine-mechanical issues. An injector-circuit code may involve wiring, a connector, the injector, or its control circuit. P1204 alone does not identify the cause or prove that any component has failed.

How to diagnose P1204

  1. Confirm the vehicle’s make, model, year, engine, and the exact code using a suitable scan tool.
  2. Look up P1204 in vehicle-specific service information to establish whether it refers to a misfire or an injector-circuit fault.
  3. Record other stored codes and freeze-frame data, which capture engine conditions when the code was set.
  4. If the code indicates a misfire, follow the vehicle’s diagnostic procedure to assess cylinder contribution and related ignition, fuel, and mechanical systems.
  5. If it indicates an injector-circuit fault, have the relevant connector and wiring checked for damage or poor connections, and test the circuit using the manufacturer’s procedure.
  6. Clear the code only after documenting it and completing appropriate checks; then verify whether it returns.

How to fix P1204

The repair depends on vehicle-specific diagnosis. A technician may need to address a wiring or connector problem, an injector-related issue, or another cause of a misfire. Do not replace parts based on P1204 alone, and use a qualified technician for electrical testing if you are unsure.

Can I drive with P1204?

Driving advice depends on symptoms. If the engine runs roughly, loses power, or the check-engine light flashes, stop driving when safe and arrange prompt professional assessment, since continued operation may worsen damage. If there are no symptoms and the light is steady, consult vehicle-specific guidance and arrange diagnosis soon.

P1204 frequently asked questions

What does code P1204 mean?

Its meaning varies by vehicle. The supplied listings associate it with either a cylinder 4 misfire or an electrical fault in the cylinder 4 injector circuit.

Does P1204 mean the cylinder 4 injector is bad?

No. Some listings describe an injector-circuit electrical fault, but the code alone does not confirm a failed injector; wiring, connectors, or other causes may need investigation.

Can I drive with P1204?

It depends on how the vehicle runs. Rough running, reduced power, or a flashing check-engine light calls for stopping when safe and seeking prompt assistance. Follow the vehicle’s guidance if symptoms are absent.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.