Source-backed diagnostic reference

P1242 Code: Meaning & Diagnostic Guide

Throttle Vent Control Motor Circuit 2 Malfunction

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1242 mean?

  • ACURA: Throttle Vent Control Motor Circuit 2 Malfunction Source
  • HONDA: Throttle Vent Control Motor Circuit 2 Malfunction Source
  • INFINITI: Throttle Vent Control Motor Circuit 2 Malfunction Source
  • JAGUAR: Sensor Power Supply High Input Source
  • OTHER: Sensor Power Supply High Input Source
  • VOLKSWAGEN: Cylinder 6 Injector Circuit Open Circuit Source

P1242 quick answer

P1242 does not have one confirmed meaning across all vehicles. The supplied reference lists it as a throttle vent control motor circuit fault for some Acura, Honda, and Infiniti vehicles; a sensor power supply high input for some Jaguar applications; and a cylinder 6 injector circuit open for some Volkswagen applications. Check the vehicle-specific service information before diagnosing it.

Is P1242 generic or manufacturer-specific?

P1242 currently has manufacturer-labelled reference definitions for ACURA, HONDA, INFINITI, JAGUAR, OTHER, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1242 works in the vehicle

P1242 is a powertrain diagnostic trouble code, but its definition varies by manufacturer and application. “Circuit malfunction” or “open circuit” indicates an electrical issue may be detected in a monitored path; “high input” means a signal is higher than expected. The code alone does not identify a failed part.

P1242 symptoms

Symptoms depend on the vehicle and the applicable definition. Possible signs may include a warning light, engine running or performance changes, or no obvious symptoms. These are not established for every vehicle reporting P1242.

Possible causes of P1242

Depending on the vehicle-specific definition, possibilities may include damaged wiring or connectors, a problem with the relevant motor or sensor power circuit, or an injector circuit issue. P1242 alone does not confirm any of these causes or identify a failed component.

How to diagnose P1242

  1. Confirm the vehicle’s make, model, year, engine, and market, then look up P1242 in its manufacturer-specific service information.
  2. Use a compatible scan tool to record all codes and available freeze-frame data before clearing anything.
  3. Compare the code description and symptoms with the vehicle-specific information; do not assume a definition from another manufacturer applies.
  4. Inspect relevant wiring and connectors for visible damage or poor connections, following the correct service procedure.
  5. Have a qualified technician perform the specified circuit tests and confirm the fault before replacing parts.

How to fix P1242

Repair depends on the confirmed vehicle-specific definition and test results. A wiring or connector repair, or service to a relevant circuit or component, may be appropriate only if diagnosis supports it. Consult a qualified technician and avoid replacing parts based on the code alone.

Can I drive with P1242?

The code by itself does not establish whether the vehicle is safe to drive. If the engine runs poorly, loses power, stalls, or shows other serious symptoms, stop in a safe place and arrange professional assistance. If there are no noticeable symptoms, seek prompt vehicle-specific diagnosis and follow the owner’s manual.

P1242 frequently asked questions

What does P1242 mean?

Its meaning depends on the vehicle. The supplied reference associates P1242 with different throttle vent control, sensor power supply, and injector circuit descriptions across listed manufacturers.

Does P1242 identify a failed part?

No. It reports a detected fault condition, and the code alone does not confirm which component or circuit is responsible.

Can I diagnose P1242 without the vehicle details?

Not reliably. The make, model, year, engine, and manufacturer-specific diagnostic information are needed to select the correct definition and test procedure.

Can I keep driving with P1242?

The code alone cannot determine drivability. Consider the vehicle’s symptoms and owner’s manual; seek help promptly if it runs poorly, loses power, or stalls.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.