Source-backed diagnostic reference

P1244 Code: Meaning & Diagnostic Guide

Closed Throttle Position Insufficient

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1244 mean?

  • ACURA: Closed Throttle Position Insufficient Source
  • FORD: Alternator Load Input Failed High Source
  • HONDA: Closed Throttle Position Insufficient Source
  • INFINITI: Closed Throttle Position Insufficient Source
  • LINCOLN: Alternator Load Input Failed High Source
  • MERCURY: Alternator Load Input Failed High Source
  • OTHER: Alternator Load Input Failed High Source
  • SUBARU: Wastegate Control Solenoid Valve Malfunction Low Input Source
  • VOLKSWAGEN: Cylinder 8 Injector Circuit Open Circuit Source

P1244 quick answer

P1244 does not have one universal meaning in the supplied evidence. Its interpretation depends on the vehicle: it may refer to throttle position, alternator load input, a wastegate control solenoid, or an injector circuit. Confirm the exact meaning for your vehicle’s make, model, year, and engine before diagnosing it.

Is P1244 generic or manufacturer-specific?

P1244 currently has manufacturer-labelled reference definitions for ACURA, FORD, HONDA, INFINITI, LINCOLN, MERCURY and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1244 works in the vehicle

The available references list P1244 as “Closed Throttle Position Insufficient” for Acura, Honda, and Infiniti; “Alternator Load Input Failed High” for Ford, Lincoln, Mercury, and an unspecified “Other” entry; “Wastegate Control Solenoid Valve Malfunction Low Input” for Subaru; and “Cylinder 8 Injector Circuit Open Circuit” for Volkswagen. These are manufacturer-specific descriptions, not interchangeable definitions.

P1244 symptoms

Symptoms depend on which system the code refers to and may be absent. Depending on the vehicle, a driver might notice changes in engine response, charging-system behavior, or engine running. The code alone does not establish that any particular symptom or component is present.

Possible causes of P1244

Possible causes depend on the vehicle-specific definition and test results. The code descriptions point to different areas—throttle-position reporting, alternator-load input, wastegate-solenoid input, or a cylinder 8 injector circuit—but do not confirm a failed part or explain why the code was set.

How to diagnose P1244

  1. Record the vehicle’s make, model, year, engine, and the scan tool’s exact code description.
  2. Check a reliable service source for the P1244 definition that applies to that specific vehicle.
  3. Read and record all stored and pending codes, along with available freeze-frame data, before clearing anything.
  4. Follow the vehicle-specific diagnostic procedure to test the system named by the applicable code definition.
  5. Have a qualified technician assess the vehicle if the correct procedure or required equipment is not available.

How to fix P1244

Do not replace a part based on P1244 alone. Once the vehicle-specific meaning is confirmed, use its diagnostic procedure and test results to identify the issue; repairs may involve a circuit or component in the system named by that procedure. Recheck for codes after repairs.

Can I drive with P1244?

The code alone cannot determine whether the vehicle is safe to drive. If the vehicle runs poorly, shows a charging warning, loses power, or has another serious warning, stop in a safe place and seek professional advice. Otherwise, arrange prompt diagnosis and follow the vehicle’s manual.

P1244 frequently asked questions

What does P1244 mean?

Its meaning varies by manufacturer and vehicle. The supplied references associate it with several different systems, so confirm the definition for the exact vehicle.

Does P1244 identify a failed part?

No. It is a diagnostic code description, not proof that a specific component has failed. Vehicle-specific testing is needed.

Can I diagnose P1244 without the vehicle details?

Not reliably. The make, model, year, engine, and applicable service information are needed to choose the correct interpretation and diagnostic procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.