Source-backed diagnostic reference

P1245 Code: Meaning & Diagnostic Guide

Intake Plenum Switchover Valve

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1245 mean?

  • BUICK: Intake Plenum Switchover Valve Source
  • CADILLAC: Intake Plenum Switchover Valve Source
  • CHEVY: Intake Plenum Switchover Valve Source
  • CHRYSLER: Intake Plenum Switchover Valve Source
  • FORD: Alternator Load Input Failed Low Source
  • GM: Intake Plenum Switchover Valve Source
  • GMC: Intake Plenum Switchover Valve Source
  • JAGUAR: Crank Signal Low Input Source
  • LINCOLN: Alternator Load Input Failed Low Source
  • MERCURY: Alternator Load Input Failed Low Source
  • OLDSMOBILE: Intake Plenum Switchover Valve Source
  • OTHER: Alternator Load Input Failed Low Source
  • SATURN: Intake Plenum Switchover Valve Source
  • SUBARU: Wastegate Control Solenoid Valve Malfunction Fail Safe Source
  • VOLKSWAGEN: Needle Lift Sensor Circuit Short To Ground Source

P1245 quick answer

P1245 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied reference lists different meanings, including an intake plenum switchover valve, an alternator load input, a crank signal, a wastegate control solenoid, or a needle lift sensor circuit. Confirm the definition for the vehicle’s make, model, year, and engine before diagnosing it.

Is P1245 generic or manufacturer-specific?

P1245 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, FORD, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1245 works in the vehicle

A diagnostic trouble code (DTC) is a standardized-format identifier, but P1245 does not have one universal definition in the supplied evidence. For example, some listed makes associate it with an intake plenum switchover valve, while others associate it with an alternator load input. The correct interpretation requires vehicle-specific service information.

P1245 symptoms

Symptoms depend on what P1245 means for the particular vehicle. Depending on the system involved, a driver might notice a warning light, a change in engine performance, or no obvious symptom. These possibilities do not confirm a failed component.

Possible causes of P1245

Possible causes depend on the vehicle-specific definition and diagnostic results. They may involve the relevant component, its wiring or connectors, or another issue in the monitored circuit or system. The code alone does not establish a cause.

How to diagnose P1245

  1. Record the vehicle’s make, model, year, engine, and any other stored codes.
  2. Look up P1245 in reliable service information specific to that vehicle; do not rely on a generic code description.
  3. Save scan-tool data, including freeze-frame information, before clearing codes.
  4. Follow the vehicle-specific diagnostic procedure and check relevant wiring, connectors, and components for visible damage or poor connections.
  5. Have a qualified technician perform any required electrical or component tests using the manufacturer’s procedure.

How to fix P1245

There is no single confirmed repair for P1245 across vehicles. Repair only after the vehicle-specific definition and test results identify the problem; avoid replacing a component based on the code alone.

Can I drive with P1245?

The code by itself does not establish whether a vehicle is safe to drive. Use the vehicle’s symptoms and owner’s manual as context, and seek professional assessment if performance changes, warning lights appear, or you are unsure whether continued driving is appropriate.

P1245 frequently asked questions

What does code P1245 mean?

Its meaning varies by manufacturer and vehicle. The supplied reference gives several different definitions, so confirm the code using vehicle-specific service information.

Does P1245 identify a failed part?

No. A trouble code points to a monitored system or condition; it does not by itself prove that a particular component has failed.

Can I diagnose P1245 with a generic code lookup?

A generic lookup may show conflicting descriptions. Use the vehicle’s make, model, year, and engine to find the correct definition and diagnostic procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.