Source-backed diagnostic reference

P1272 Code: Meaning & Diagnostic Guide

Accelerator Pedal Position Sensor 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1272 mean?

  • BUICK: Accelerator Pedal Position Sensor 2 Source
  • CADILLAC: Accelerator Pedal Position Sensor 2 Source
  • CHEVY: Accelerator Pedal Position Sensor 2 Source
  • CHRYSLER: Accelerator Pedal Position Sensor 2 Source
  • FORD: Cylinder #2 High To Low Side Open Source
  • GM: Accelerator Pedal Position Sensor 2 Source
  • GMC: Accelerator Pedal Position Sensor 2 Source
  • LINCOLN: Cylinder 2 High To Low Side Open Source
  • MERCURY: Cylinder 2 High To Low Side Open Source
  • OLDSMOBILE: Accelerator Pedal Position Sensor 2 Source
  • OTHER: Cylinder #2 High To Low Side Open Source
  • SATURN: Accelerator Pedal Position Sensor 2 Source

P1272 quick answer

P1272 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with Accelerator Pedal Position Sensor 2 for several GM brands, and with a cylinder 2 high-to-low-side open for Ford, Lincoln, Mercury, and some other entries. Confirm the definition for your vehicle before diagnosing it.

Is P1272 generic or manufacturer-specific?

P1272 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, FORD, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1272 works in the vehicle

A diagnostic trouble code (DTC) records a condition detected by a vehicle’s control system. The available references show that P1272 does not have one universal definition. “Accelerator Pedal Position Sensor 2” refers to a second pedal-position signal; “high-to-low-side open” describes a possible break or loss of continuity in a specific control circuit. The correct interpretation depends on the vehicle’s make, model, year, and powertrain.

P1272 symptoms

Symptoms depend on which definition applies and whether the condition is currently present. Possible signs may include a warning light, altered throttle response, reduced power, or engine-running concerns, but the code alone does not establish that any of these are occurring.

Possible causes of P1272

Possible causes depend on the vehicle-specific definition and may include a wiring or connector issue, a sensor or circuit fault, or another problem identified by the manufacturer’s diagnostic procedure. P1272 alone does not confirm a failed sensor, cylinder, or other component.

How to diagnose P1272

  1. Identify the vehicle’s make, model, year, engine, and any relevant powertrain details.
  2. Use a reliable vehicle-specific service source or scan tool to confirm what P1272 means for that vehicle.
  3. Read stored codes and available freeze-frame data; note whether other codes are present.
  4. Follow the manufacturer’s diagnostic procedure to inspect relevant wiring and connectors and test the specified circuit or signals.
  5. Have a qualified technician assess the vehicle if the definition or test results are unclear.

How to fix P1272

Choose repairs only after confirming the vehicle-specific code definition and test results. Depending on the diagnosis, the repair may involve addressing a wiring or connector problem or replacing a verified faulty part. Do not replace a component based on P1272 alone.

Can I drive with P1272?

Driving risk cannot be determined from this code alone. If the vehicle has reduced power, unpredictable throttle response, stalling, or another serious drivability problem, stop when safe and arrange professional help. If it drives normally, consult vehicle-specific guidance and have the code diagnosed promptly.

P1272 frequently asked questions

What does P1272 mean?

Its meaning varies by manufacturer. The supplied references list Accelerator Pedal Position Sensor 2 for several GM brands and a cylinder 2 high-to-low-side open for some other entries. Verify the definition for the exact vehicle.

Does P1272 mean the accelerator pedal sensor has failed?

Not necessarily. That description appears for some manufacturers, but the code alone does not confirm a failed sensor. Vehicle-specific testing is needed.

Can I keep driving with P1272?

The code by itself does not establish whether driving is safe. Consider how the vehicle behaves, follow the owner’s guidance, and stop when safe if there are serious drivability symptoms.

What information is needed to diagnose P1272?

The vehicle’s make, model, year, engine, the manufacturer-specific code definition, other stored codes, and diagnostic test results help determine the correct next steps.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.