P1275 Code: Meaning & Diagnostic Guide
Accelerator Pedal Position (APP) Sensor 1 Circuit
What does P1275 mean?
- BUICK: Accelerator Pedal Position (APP) Sensor 1 Circuit Source
- CADILLAC: Accelerator Pedal Position (APP) Sensor 1 Circuit Source
- CHEVY: Accelerator Pedal Position (APP) Sensor 1 Circuit Source
- CHRYSLER: Accelerator Pedal Position (APP) Sensor 1 Circuit Source
- FORD: Cylinder #5 High To Low Side Open Source
- GM: Accelerator Pedal Position (APP) Sensor 1 Circuit Source
- GMC: Accelerator Pedal Position (APP) Sensor 1 Circuit Source
- LINCOLN: Cylinder 5 High To Low Side Open Source
- MERCURY: Cylinder 5 High To Low Side Open Source
- OLDSMOBILE: Accelerator Pedal Position APP Sensor 1 Circuit Source
- OTHER: Cylinder #5 High To Low Side Open Source
- SATURN: Accelerator Pedal Position APP Sensor 1 Circuit Source
P1275 quick answer
P1275 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references describe it as an Accelerator Pedal Position (APP) Sensor 1 circuit code for some makes, and as a cylinder 5 high-to-low side open code for others. Confirm the definition for your exact vehicle before diagnosing it.
Is P1275 generic or manufacturer-specific?
P1275 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, FORD, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1275 works in the vehicle
An APP sensor reports how far the accelerator pedal is pressed. A circuit code means the vehicle computer detected an issue in the related electrical signal path; it does not by itself prove the sensor has failed. In the alternate definition, “high-to-low side open” describes an electrical circuit condition associated with cylinder 5. Use manufacturer-specific service information to identify which definition applies.
P1275 symptoms
Symptoms depend on the vehicle and the applicable definition. An APP circuit issue could be accompanied by inconsistent accelerator response or reduced power. A cylinder 5 circuit issue could occur with rough running or a misfire. These are possibilities, not symptoms established by the code alone; some vehicles may show few noticeable changes.
Possible causes of P1275
Possible causes depend on the code definition and may include damaged wiring, a poor electrical connection, or a problem with the relevant sensor or control circuit. P1275 alone does not confirm a failed component or establish the cause.
How to diagnose P1275
- Confirm the vehicle’s year, make, model, engine, and the manufacturer-specific description of P1275.
- Use a scan tool to record all stored and pending codes and any available freeze-frame data before clearing codes.
- Follow service information for the applicable definition: check APP sensor circuit data if the code refers to APP Sensor 1, or the cylinder 5 circuit if it refers to a high-to-low side open.
- Inspect the relevant connectors and wiring for visible damage, corrosion, looseness, or poor contact.
- Compare scan-tool readings and circuit test results with the vehicle’s service specifications before replacing parts.
How to fix P1275
Repair should follow the confirmed vehicle-specific diagnosis. A wiring or connection repair may be needed, but a sensor or other component should be replaced only if testing identifies it as faulty. If the cause is unclear, seek diagnosis from a qualified technician.
Can I drive with P1275?
Driving guidance depends on how the vehicle behaves. If accelerator response is unreliable, power is reduced, or the engine runs roughly, avoid driving in situations where loss of power or control could be hazardous and arrange professional inspection. If there are no noticeable symptoms, do not assume the vehicle is safe or unsafe from the code alone; confirm the meaning and have it assessed.
P1275 frequently asked questions
What does P1275 mean?
Its meaning varies by manufacturer. The supplied references list an APP Sensor 1 circuit definition for some makes and a cylinder 5 high-to-low side open definition for others.
Does P1275 mean the accelerator pedal sensor is bad?
Not necessarily. Even when P1275 refers to the APP Sensor 1 circuit, the code indicates a circuit concern and does not confirm that the sensor itself has failed.
Can I drive with P1275?
That depends on the vehicle and symptoms. Unreliable accelerator response, reduced power, or rough running warrants prompt assessment; the code alone cannot determine whether continued driving is safe.
What should I check first for P1275?
First confirm the code definition for the exact vehicle, then review related codes and inspect the relevant circuit using vehicle-specific service information.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.