Source-backed diagnostic reference

P1289 Code: Meaning & Diagnostic Guide

Switching Solenoid for Air Assisted Injection Valves Bank 2 Control Circuit Signal High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1289 mean?

  • BMW: Switching Solenoid for Air Assisted Injection Valves Bank 2 Control Circuit Signal High Source
  • DODGE: Manifold Tune Valve Solenoid Circuit Open Or Shorted Source
  • FORD: Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range Source
  • JEEP: Manifold Tune Valve Solenoid Circuit Open Or Shorted Source
  • LINCOLN: Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range Source
  • MERCURY: Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range Source
  • OTHER: Cylinder Head Temp Sensor High Input Source
  • PLYMOUTH: Manifold Tune Valve Solenoid Circuit Open Or Shorted Source
  • PONTIAC: Manifold Tune Valve Solenoid Circuit Open Or Shorted Source
  • VOLKSWAGEN: Turbocharge Bypass Valve Short To Ground Source

P1289 quick answer

P1289 is a powertrain diagnostic trouble code, but its meaning depends on the vehicle. The supplied references associate it with different circuits or sensors, so check the code definition for your exact make, model, year, and engine before diagnosing it.

Is P1289 generic or manufacturer-specific?

P1289 currently has manufacturer-labelled reference definitions for BMW, DODGE, FORD, JEEP, LINCOLN, MERCURY and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1289 works in the vehicle

A diagnostic trouble code (DTC) records a condition detected by a vehicle’s control system. P1289 is not assigned one consistent description across the supplied references: examples include a cylinder-head temperature sensor signal, a manifold tuning valve solenoid circuit, an air-assisted injection valve solenoid circuit, or a turbocharger bypass valve circuit. These are vehicle-specific possibilities, not a confirmed diagnosis for every vehicle with P1289.

P1289 symptoms

Symptoms depend on the vehicle and the system linked to the code. A warning light may be the only noticeable sign; changes in engine performance or drivability are also possible. The code alone does not establish which symptoms, if any, should occur.

Possible causes of P1289

Possible causes depend on the vehicle-specific code definition and may include a wiring or connector fault, a circuit problem, or an issue with the relevant sensor or solenoid. P1289 alone does not confirm a failed component.

How to diagnose P1289

  1. Confirm the vehicle’s make, model, year, engine, and market.
  2. Use a scan tool or reliable service information to find the P1289 definition that applies to that exact vehicle.
  3. Record all stored codes and freeze-frame data before clearing anything; related codes may help narrow the diagnosis.
  4. Following vehicle-specific service information, inspect the relevant wiring and connectors for visible damage, looseness, or corrosion.
  5. Have the appropriate circuit and component tests performed using the manufacturer’s diagnostic procedure before replacing parts.

How to fix P1289

Repair depends on the confirmed vehicle-specific cause. Address wiring, connector, circuit, or component faults only after testing identifies them. Consult qualified service information or a technician, and verify the repair by rescanning the vehicle.

Can I drive with P1289?

P1289 alone does not determine whether a vehicle is safe to drive. Check the owner’s manual and consider the warning lights and how the vehicle behaves. If it runs poorly, overheats, or shows a serious warning, stop in a safe place and seek professional advice; otherwise, arrange diagnosis promptly.

P1289 frequently asked questions

What does code P1289 mean?

Its meaning varies by vehicle. The supplied references list several different sensor and solenoid circuit descriptions, so confirm the definition for your exact vehicle.

Does P1289 identify a failed part?

No. It reports a detected condition, not necessarily a failed component. Testing is needed to identify the cause.

Can I drive with P1289?

The code alone cannot establish whether driving is safe. Use the vehicle’s warning lights and behavior as context, consult the owner’s manual, and seek diagnosis.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.