P1302 Code: Meaning & Diagnostic Guide
Cylinder 2 Misfire
What does P1302 mean?
P1302 quick answer
P1302 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references list it as a cylinder 2 misfire for Acura, Honda, and Infiniti, and as “Boost Calibration Low” for Ford, Lincoln, Mercury, and some other applications. Check the vehicle-specific service information before diagnosing.
Is P1302 generic or manufacturer-specific?
P1302 currently has manufacturer-labelled reference definitions for ACURA, FORD, HONDA, INFINITI, LINCOLN, MERCURY and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1302 works in the vehicle
A diagnostic trouble code (DTC) is a stored fault identifier. Although P1302 is in the powertrain code category, the references do not show one universal definition: the listed meaning varies by manufacturer. The code identifies a diagnostic condition, not a confirmed failed part.
P1302 symptoms
Symptoms depend on the vehicle and the code definition. If it refers to a cylinder 2 misfire, possible signs include rough running, hesitation, reduced power, or an illuminated check-engine light. If it refers to low boost calibration, drivability or power changes may occur, but the code alone does not establish that they will.
Possible causes of P1302
The cause cannot be determined from P1302 alone. For a misfire interpretation, ignition, fuel delivery, wiring, or engine-mechanical issues may be considered during diagnosis. For a boost-calibration interpretation, vehicle-specific boost-control or calibration checks may be relevant. These are diagnostic possibilities, not confirmed failures.
How to diagnose P1302
- Confirm the vehicle’s year, make, model, engine, and market, then verify the P1302 definition in reliable vehicle-specific service information.
- Use a scan tool to record the code status, freeze-frame data, and any related codes before clearing anything.
- Follow the diagnostic procedure for the confirmed definition; do not assume cylinder 2 misfire or low boost calibration applies to every vehicle.
- Have a qualified technician inspect relevant systems and wiring, and perform any required tests using the vehicle’s service information.
- If the code returns, use the test results to identify the cause rather than replacing parts based on the code alone.
How to fix P1302
There is no single repair for P1302 across all vehicles. The appropriate fix depends on the manufacturer-specific definition and test results. Avoid replacing components or changing calibrations without confirming the fault; seek a qualified technician if diagnosis requires specialized equipment.
Can I drive with P1302?
Driving risk depends on the vehicle’s behavior and the confirmed code meaning. If the engine runs severely rough, power drops substantially, warning lights flash, or the vehicle behaves unpredictably, stop somewhere safe and arrange assistance. If symptoms are mild or absent, consult the owner’s manual and have the code diagnosed promptly; this is not a guarantee that continued driving is safe.
P1302 frequently asked questions
What does P1302 mean?
Its meaning varies by manufacturer. The supplied references list cylinder 2 misfire for Acura, Honda, and Infiniti, and “Boost Calibration Low” for Ford, Lincoln, Mercury, and some other applications.
Does P1302 identify a failed part?
No. It identifies a stored diagnostic condition, and further vehicle-specific testing is needed to find the cause.
Can I keep driving with P1302?
That depends on the vehicle and symptoms. Severe rough running, major power loss, a flashing warning light, or unpredictable behavior calls for stopping safely and seeking assistance.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.