P1303 Code: Meaning & Diagnostic Guide
Cylinder 3 Misfire
What does P1303 mean?
P1303 quick answer
P1303 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references list it as a cylinder 3 misfire for Acura, Honda, and Infiniti, and as an EGR calibration fault for Ford, Lincoln, and Mercury. Confirm the definition for your exact vehicle before diagnosing.
Is P1303 generic or manufacturer-specific?
P1303 currently has manufacturer-labelled reference definitions for ACURA, FORD, HONDA, INFINITI, LINCOLN, MERCURY and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1303 works in the vehicle
A diagnostic trouble code (DTC) is a label stored by a vehicle’s control system when it detects a condition outside expected limits. P1303 does not have one universal definition in the supplied evidence. A cylinder 3 misfire means combustion in that cylinder may be irregular; an EGR calibration fault concerns the calibration or operation of the exhaust gas recirculation system. The code alone does not identify a failed part.
P1303 symptoms
Symptoms depend on which definition applies and what is causing the condition. A cylinder 3 misfire may be accompanied by rough running, hesitation, reduced power, or a flashing check-engine light. An EGR calibration fault may occur with a check-engine light or drivability changes, but symptoms vary. Some vehicles may show few noticeable symptoms.
Possible causes of P1303
Possible causes depend on the vehicle and confirmed code meaning. For a misfire, possibilities include an ignition, fuel-delivery, wiring, or mechanical issue affecting cylinder 3. For an EGR calibration fault, possibilities may involve the EGR system, its electrical connections, or calibration-related issues. These are diagnostic possibilities, not confirmed failures.
How to diagnose P1303
- Confirm the vehicle’s make, model, year, engine, and market, then check manufacturer service information to verify what P1303 means for that exact vehicle.
- Scan for other stored or pending codes and review freeze-frame data, which records operating conditions when the fault was detected.
- If the vehicle-specific definition is a cylinder 3 misfire, use the service procedure to assess the misfire and check relevant ignition, fuel, wiring, and mechanical systems before replacing parts.
- If the definition is an EGR calibration fault, follow the manufacturer’s procedure to assess EGR operation, related wiring and connections, and any calibration requirements.
- After repairs or adjustments, clear codes only as directed, then verify the result with an appropriate drive cycle and a follow-up scan.
How to fix P1303
Do not replace parts based on P1303 alone. The correct repair depends on the vehicle-specific definition and test results. Have a qualified technician diagnose the relevant system using manufacturer service information; do not attempt hazardous high-voltage repairs.
Can I drive with P1303?
Driving advice depends on symptoms and the vehicle. If the check-engine light is flashing, the engine is running very roughly, or power is substantially reduced, pull over when safe and arrange professional help; continued driving may worsen damage. If the light is steady and the vehicle feels normal, consult the owner’s manual and arrange diagnosis promptly.
P1303 frequently asked questions
Does P1303 always mean cylinder 3 is misfiring?
No. The supplied references associate it with a cylinder 3 misfire for some makes and an EGR calibration fault for others. Check the definition for your exact vehicle.
Does P1303 identify the part that failed?
No. It reports a detected condition, not a confirmed failed component. Further testing is needed to find the cause.
Can I keep driving with P1303?
It depends on the symptoms and vehicle-specific fault. A flashing check-engine light, severe roughness, or major power loss calls for stopping when safe and seeking professional assistance.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.