Source-backed diagnostic reference

P1337 Code: Meaning & Diagnostic Guide

CKP Sensor B Low Input

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1337 mean?

  • ACURA: CKP Sensor B Low Input Source
  • HONDA: CKP Sensor B Low Input Source
  • INFINITI: CKP Sensor B Low Input Source
  • VOLKSWAGEN: CMP Sensor Bank 1 Short To Ground Source

P1337 quick answer

P1337 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references list “CKP Sensor B Low Input” for Acura, Honda, and Infiniti, and “CMP Sensor Bank 1 Short To Ground” for Volkswagen. Confirm the definition for your vehicle before diagnosing it.

Is P1337 generic or manufacturer-specific?

P1337 currently has manufacturer-labelled reference definitions for ACURA, HONDA, INFINITI, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1337 works in the vehicle

CKP means crankshaft position sensor; CMP means camshaft position sensor. “Low input” describes a signal reading below the expected range, while “short to ground” describes a possible electrical path to ground. These are different interpretations of P1337, not a universal definition or proof that a sensor has failed.

P1337 symptoms

Depending on the vehicle and the underlying issue, there may be no obvious symptoms, or the engine may run unevenly, start poorly, stall, or have reduced performance. The code alone does not confirm any of these symptoms or identify a failed part.

Possible causes of P1337

Depending on the vehicle-specific definition, possibilities may include a sensor signal or circuit problem, damaged wiring, a poor connection, or another issue affecting the signal. The available evidence does not establish a cause or confirm a failed component.

How to diagnose P1337

  1. Record the vehicle’s make, model, year, engine, and all stored and pending codes.
  2. Look up P1337 in service information for that exact vehicle; do not rely on another manufacturer’s definition.
  3. Note when the code appeared and whether there are related codes or symptoms.
  4. If appropriate, visually check accessible sensor connectors and wiring for damage or loose connections, with the vehicle off.
  5. Have a qualified technician test the relevant circuit and signal using vehicle-specific procedures before replacing parts.

How to fix P1337

The correct repair depends on the confirmed vehicle-specific definition and test results. A sensor, wiring, connector, or other circuit issue may be considered only if diagnosis supports it. Avoid replacing parts based on the code alone.

Can I drive with P1337?

The code alone cannot determine whether the vehicle is safe to drive. If the engine stalls, runs severely, or has other concerning symptoms, stop in a safe place and arrange professional assessment. Otherwise, consult a technician promptly and follow the vehicle’s warning indicators and owner’s manual.

P1337 frequently asked questions

What does P1337 mean?

It is a manufacturer-specific powertrain code. In the supplied references, Acura, Honda, and Infiniti use it for “CKP Sensor B Low Input,” while Volkswagen uses it for “CMP Sensor Bank 1 Short To Ground.”

Does P1337 mean a sensor has failed?

No. The code’s wording may point to a signal or circuit condition, but it does not by itself confirm a failed sensor or any other component.

Can I drive with P1337?

The code alone is not enough to assess drivability. Consider the vehicle’s symptoms and warning indicators, and seek professional help if it stalls or runs severely.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.