Source-backed diagnostic reference

P1338 Code: Meaning & Diagnostic Guide

CMP Sensor Bank 1 Open Circuit Or Short To B+

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1338 mean?

  • VOLKSWAGEN: CMP Sensor Bank 1 Open Circuit Or Short To B+ Source

P1338 quick answer

P1338 is listed in the supplied reference as “CMP Sensor Bank 1 Open Circuit Or Short To B+” for Volkswagen. It describes an electrical-circuit condition; it does not by itself confirm which part has failed.

Is P1338 generic or manufacturer-specific?

P1338 currently has manufacturer-labelled reference definitions for VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1338 works in the vehicle

CMP means camshaft position, and B+ means battery-positive voltage. “Open circuit” indicates an interrupted electrical path; “short to B+” indicates voltage where it may not be expected. “Bank 1” identifies an engine bank, but its location depends on the engine.

P1338 symptoms

Depending on the vehicle, a camshaft-position circuit issue may be associated with a warning light, difficult starting, rough running, or reduced performance. The reference does not establish that any particular symptom will occur.

Possible causes of P1338

Possible areas to investigate include wiring, connectors, or the camshaft position sensor circuit. The code description alone does not identify a confirmed cause or failed component.

How to diagnose P1338

  1. Confirm the code and record any other stored codes and available freeze-frame data.
  2. Consult service information for the specific vehicle and engine to identify Bank 1 and the relevant circuit.
  3. With the ignition off, visually check accessible wiring and connectors for damage, looseness, or corrosion.
  4. Have a qualified technician test the circuit against vehicle-specific procedures before replacing parts.
  5. Clear the code only after diagnosis or repair, then check whether it returns.

How to fix P1338

Choose repairs based on test results, not the code alone. A qualified technician can determine whether a wiring, connector, sensor, or other circuit issue is responsible. Follow vehicle-specific service procedures.

Can I drive with P1338?

Driving advice depends on how the vehicle runs and the vehicle-specific guidance. Arrange diagnosis promptly; if it runs poorly, stalls, or is difficult to control, stop somewhere safe and seek assistance.

P1338 frequently asked questions

Does P1338 prove the camshaft position sensor is faulty?

No. The supplied description identifies an open circuit or short to B+ in the CMP sensor circuit, but does not confirm the sensor itself has failed.

What does “short to B+” mean?

It means the circuit may be connected to battery-positive voltage where that voltage is not expected.

Is the location of Bank 1 the same on every engine?

No. Use service information for the specific engine to identify Bank 1.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.