P1345 Code: Meaning & Diagnostic Guide
SGC (Cam Position) Sensor Circuit Malfunction/ Crankshaft Position - Camshaft Position Correlation
What does P1345 mean?
- BMW: Misfire Cylinder 2 With Fuel Cut-off Source
- BUICK: CKP/CMP Correlation Source
- CADILLAC: CKP/CMP Correlation Source
- CHEVY: CKP/CMP Correlation Source
- CHRYSLER: CKP/CMP Correlation Source
- GM: CKP/CMP Correlation Source
- GMC: CKP/CMP Correlation Source
- KIA: No SGC Signal 1.6L Source
- LEXUS: VVT Sensor Circuit Malfunction Bank 1 Source
- MAZDA: No CMP or SGC Signal Source
- OLDSMOBILE: CKP CMP Correlation Source
- OTHER: SGC (Cam Position) Sensor Circuit Malfunction/ Crankshaft Position - Camshaft Position Correlation Source
- SATURN: CKP CMP Correlation Source
- VOLKSWAGEN: Ignition Coil Output Stage 3 Short To Ground Source
- GENERIC: SGC (Cam Position) Sensor Circuit Malfunction/ Crankshaft Position - Camshaft Position Correlation Source
P1345 quick answer
P1345 generally indicates a camshaft-position signal circuit problem or a mismatch between crankshaft and camshaft position signals. Its exact meaning can vary by vehicle, so check the manufacturer-specific definition before diagnosing.
Is P1345 generic or manufacturer-specific?
P1345 has a generic source-backed definition in this database, with additional manufacturer-labelled references for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, GM and others. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1345 works in the vehicle
The crankshaft position sensor (CKP) and camshaft position sensor (CMP) report where those engine parts are as they rotate. The engine computer uses their signals to coordinate engine operation. A correlation fault means the signals may not match as expected; a circuit fault means a sensor signal or its electrical path may be a concern. P1345 has different meanings on some vehicles, so the code alone does not identify a failed part.
P1345 symptoms
Depending on the vehicle and the underlying issue, possible symptoms may include a check-engine light, rough running, difficulty starting, reduced performance, or stalling. A vehicle may also show the code without obvious symptoms.
Possible causes of P1345
Possible causes, depending on the vehicle, include a sensor or wiring/connector issue, an inaccurate signal, or a problem affecting camshaft-to-crankshaft timing. These are diagnostic possibilities, not confirmed causes; some manufacturers assign P1345 a different meaning.
How to diagnose P1345
- Confirm the vehicle’s year, make, model, engine, and manufacturer-specific definition of P1345.
- Use a scan tool to record all codes and available freeze-frame data before clearing anything.
- Check for related codes and inspect accessible sensor connectors and wiring for looseness, damage, or corrosion.
- Have a qualified technician compare CKP and CMP signals and check engine timing using the vehicle’s service information.
- Diagnose the specific fault before replacing parts; the code by itself does not prove a sensor has failed.
How to fix P1345
The repair depends on the confirmed cause and the vehicle-specific definition. A technician may need to address wiring, a signal problem, or a timing-related issue. Follow the correct service information, and verify the repair by rescanning the vehicle and checking whether the code returns.
Can I drive with P1345?
Driving impact depends on symptoms and the vehicle. If the engine runs roughly, stalls, is difficult to start, or loses power, avoid unnecessary driving and arrange prompt diagnosis. If it runs normally, get the code checked soon; the code alone cannot establish that continued driving is safe.
P1345 frequently asked questions
What does P1345 mean?
Generically, it points to a camshaft-position sensor circuit malfunction or a mismatch between crankshaft and camshaft position signals. The exact meaning can differ by manufacturer.
Does P1345 mean the camshaft sensor is bad?
No. It identifies a fault condition, not a confirmed failed component. Wiring, signal, timing, or a manufacturer-specific interpretation may be involved.
Can I drive with P1345?
It depends on how the vehicle runs. Rough running, stalling, hard starting, or loss of power calls for prompt diagnosis and avoiding unnecessary driving.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.