Source-backed diagnostic reference

P1346 Code: Meaning & Diagnostic Guide

Misfire During Start Cylinder 3

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1346 mean?

  • BMW: Misfire During Start Cylinder 3 Source
  • BUICK: Intake Camshaft Position (CMP) Sensor System Performance Source
  • CADILLAC: Intake Camshaft Position (CMP) Sensor System Performance Source
  • CHEVY: Intake Camshaft Position (CMP) Sensor System Performance Source
  • CHRYSLER: Intake Camshaft Position (CMP) Sensor System Performance Source
  • GEO: Intake Camshaft Position System Performance Source
  • GM: Intake Camshaft Position (CMP) Sensor System Performance Source
  • GMC: Intake Camshaft Position (CMP) Sensor System Performance Source
  • LEXUS: VVT Sensor Range Performance Problem Bank 1 Source
  • OLDSMOBILE: Intake Camshaft Position CMP Sensor System Performance Source
  • OTHER: Fuel Level Sensor B Circuit Malfunction Source
  • SATURN: Intake Camshaft Position CMP Sensor System Performance Source
  • VOLKSWAGEN: Ignition Coil Power Output State 3 Short To B+ Source

P1346 quick answer

P1346 does not have one universal definition. Its meaning depends on the vehicle make and model; reported definitions include camshaft-position or variable-valve-timing performance, a start-up misfire, and other manufacturer-specific faults. Confirm the code using vehicle-specific service information before diagnosing or replacing parts.

Is P1346 generic or manufacturer-specific?

P1346 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, GEO and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1346 works in the vehicle

P1346 is a powertrain diagnostic trouble code, but its description varies across manufacturers. For example, the supplied references associate it with intake camshaft-position performance on several GM-related makes, a VVT sensor range issue on Lexus, a cylinder 3 start-up misfire on BMW, and different faults on Volkswagen and other vehicles. A code identifies a detected condition, not a confirmed failed component.

P1346 symptoms

Symptoms depend on the vehicle-specific meaning and may be absent. Depending on the fault, a driver might notice hard starting, rough running or a warning light; these symptoms are not established for every vehicle with P1346.

Possible causes of P1346

Possible causes cannot be determined from P1346 alone. Depending on the vehicle and its exact code definition, diagnosis may involve camshaft or VVT signals, a start-up misfire, an ignition-output circuit, or another system. The code by itself does not confirm a faulty sensor, coil, wiring, or other component.

How to diagnose P1346

  1. Record the vehicle’s year, make, model, engine, and all stored codes, including any freeze-frame data.
  2. Look up P1346 in manufacturer-specific service information or a reliable scan-tool database for that exact vehicle.
  3. Check whether other codes or recorded operating conditions point to the same system.
  4. Follow the vehicle-specific diagnostic procedure to inspect relevant data and circuits; do not replace parts based on the code description alone.
  5. Have a qualified technician assess the vehicle if the definition is unclear or specialized testing is needed.

How to fix P1346

There is no single repair for P1346. Once the exact vehicle-specific definition and cause are confirmed, repair or replace only the component or circuit identified by testing, then clear the code and verify the repair. Avoid guessing from a generic code lookup.

Can I drive with P1346?

Driving advice depends on the vehicle and symptoms. If the engine runs poorly, is difficult to start, or the warning light flashes, stop driving when safe and seek professional advice. If there are no noticeable symptoms, arrange prompt diagnosis and consult the owner’s manual; this code alone does not establish that continued driving is safe or unsafe.

P1346 frequently asked questions

What does P1346 mean?

Its meaning varies by manufacturer and vehicle. It can refer to different engine or powertrain conditions, so check the definition for the exact year, make, model, and engine.

Does P1346 mean the camshaft sensor has failed?

Not necessarily. Some supplied definitions describe camshaft-position performance, but a performance code does not by itself prove that the sensor is faulty.

Can I keep driving with P1346?

The code alone cannot determine that. Consider the vehicle’s symptoms and owner’s manual, and seek prompt diagnosis—especially if it runs poorly, is hard to start, or the warning light flashes.

Should I replace a part to clear P1346?

No. First confirm the vehicle-specific definition and use the appropriate diagnostic procedure to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.