Source-backed diagnostic reference

P1347 Code: Meaning & Diagnostic Guide

Misfire Cylinder 3 With Fuel Cut-off

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1347 mean?

  • BMW: Misfire Cylinder 3 With Fuel Cut-off Source
  • OTHER: Fuel Level Sensor B Range / Performance Source
  • VOLKSWAGEN: Bank 2 Crankshaft Camshaft Position Sensor Signal Out Of Sequence Source

P1347 quick answer

P1347 does not have one universal meaning in the supplied references. Its interpretation depends on the vehicle: the references list a cylinder 3 misfire with fuel cut-off for BMW, a fuel level sensor B range/performance issue for OTHER, and a bank 2 crankshaft/camshaft position signal out of sequence for Volkswagen.

Is P1347 generic or manufacturer-specific?

P1347 currently has manufacturer-labelled reference definitions for BMW, OTHER, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1347 works in the vehicle

P1347 is a powertrain diagnostic trouble code, but the supplied definitions differ by manufacturer. “Misfire with fuel cut-off” means the engine computer detected a combustion misfire and may have stopped fuel delivery to that cylinder. “Range/performance” means a sensor reading may be outside an expected range or behaving unexpectedly. “Out of sequence” means crankshaft and camshaft position signals may not have the expected relationship. Confirm the definition for the specific vehicle before diagnosing.

P1347 symptoms

Possible symptoms depend on which definition applies. A misfire-related interpretation may be associated with rough running or reduced performance; a fuel-level interpretation may involve an inaccurate fuel reading; a crankshaft/camshaft signal interpretation may be associated with engine-running or starting concerns. These symptoms are not confirmed by the code alone.

Possible causes of P1347

The code alone does not establish a failed part. Depending on the vehicle-specific definition, possible areas for diagnosis include the misfiring cylinder’s ignition or fuel delivery, the fuel-level sensing circuit, or crankshaft/camshaft signal timing and circuits. Other faults or wiring issues may also affect readings.

How to diagnose P1347

  1. Confirm the vehicle’s make, model, year, engine, and market, then look up P1347 using service information specific to that vehicle.
  2. Scan for all stored and pending codes, and record freeze-frame data before clearing anything.
  3. Check whether the symptoms and other codes point toward a misfire, fuel-level reading, or crankshaft/camshaft signal concern.
  4. Inspect relevant connectors and wiring for visible damage or poor connections; use vehicle-specific test procedures to evaluate the indicated system.
  5. If the diagnosis is unclear, have a qualified technician perform further testing rather than replacing parts based only on P1347.

How to fix P1347

The correct repair depends on the vehicle-specific definition and test results. Address the confirmed cause, which may involve a circuit, connection, sensor, or another system component. Do not assume that any one component has failed based on this code alone.

Can I drive with P1347?

Driving advice depends on symptoms and the vehicle. If the engine is running roughly, losing power, difficult to start, or showing a flashing warning light, stop when safe and seek prompt professional advice. If there are no noticeable symptoms, arrange diagnosis soon and follow the vehicle’s manual; the code alone cannot establish that continued driving is safe.

P1347 frequently asked questions

What does code P1347 mean?

There is no single meaning across the supplied references. It is listed as a cylinder 3 misfire with fuel cut-off for BMW, a fuel level sensor B range/performance issue for OTHER, and a bank 2 crankshaft/camshaft position signal out of sequence for Volkswagen.

Does P1347 identify a failed part?

No. It identifies a detected condition, and the applicable definition and further testing are needed to find the cause.

Can I drive with P1347?

The code alone cannot determine whether driving is safe. Consider the symptoms, consult the vehicle manual, and seek professional advice—especially if the engine runs poorly, loses power, or a warning light flashes.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.