Source-backed diagnostic reference

P1352 Code: Meaning & Diagnostic Guide

Misfire During Start Cylinder 6

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1352 mean?

  • BMW: Misfire During Start Cylinder 6 Source
  • BUICK: IC Output High/Pulse Detected When Grounded Cyl.2 Source
  • CADILLAC: IC Output High/Pulse Detected When Grounded Cyl.2 Source
  • CHEVY: IC Output High/Pulse Detected When Grounded Cyl.2 Source
  • CHRYSLER: IC Output High Pulse Detected When Grounded Cyl 2 Source
  • FORD: Ignition Coil A Primary Circuit Fault Source
  • GM: IC Output High Pulse Detected When Grounded Cyl 2 Source
  • GMC: IC Output High Pulse Detected When Grounded Cyl 2 Source
  • LINCOLN: Ignition Coil A Primary Circuit Fault Source
  • MAZDA: Ignition Coil A Primary Circuit Source
  • MERCEDES: Needle Lift Sensor Source
  • MERCURY: Ignition Coil A Primary Circuit Fault Source
  • OLDSMOBILE: IC Output High Pulse Detected When Grounded Cyl 2 Source
  • OTHER: Ignition Coil A Primary Circuit Malfunction Source
  • SATURN: IC Output High Pulse Detected When Grounded Cyl.2 Source

P1352 quick answer

P1352 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with several ignition-related conditions, including an ignition-coil primary circuit fault, an ignition-control signal issue, or a misfire during startup. Check the code definition for your exact vehicle before diagnosing it.

Is P1352 generic or manufacturer-specific?

P1352 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1352 works in the vehicle

An ignition-coil primary circuit is the low-voltage control side that helps the ignition system produce spark. “IC” means ignition control; an “output high” description refers to a signal level the control system detected. These descriptions are not interchangeable across vehicles, and P1352 alone does not confirm which component, if any, has failed.

P1352 symptoms

Depending on the vehicle and the actual fault, possible symptoms may include difficult starting, rough running, a misfire, reduced power, or an illuminated check-engine light. Some vehicles may show no obvious symptoms.

Possible causes of P1352

Depending on the vehicle-specific definition, possibilities could include an ignition-coil circuit or connection problem, an ignition-control signal issue, or another condition that affects starting or ignition. The code by itself does not establish a cause or failed part.

How to diagnose P1352

  1. Confirm the vehicle’s year, make, model, engine, and the exact P1352 definition in reliable service information.
  2. Use a scan tool to record all stored and pending codes and any available freeze-frame data before clearing codes.
  3. Check for relevant symptoms and inspect accessible ignition-system wiring and connectors for visible damage, looseness, or corrosion.
  4. Follow the vehicle-specific diagnostic procedure to test the circuit and related components; avoid replacing parts based on the code alone.
  5. If the definition or test procedure is unclear, have a qualified technician diagnose the vehicle.

How to fix P1352

Repair depends on the confirmed vehicle-specific meaning and test results. A qualified technician may need to address a wiring, connection, circuit, or component issue, but P1352 alone is not enough to select a repair. Do not work on high-voltage ignition components unless trained and equipped to do so.

Can I drive with P1352?

Driving risk depends on the vehicle’s symptoms and the underlying fault. If the engine runs roughly, loses power, is difficult to start, or the check-engine light flashes, stop driving when safe and seek professional advice. If there are no symptoms, arrange diagnosis promptly and follow the vehicle owner’s manual.

P1352 frequently asked questions

Does P1352 mean the ignition coil has failed?

No. Some supplied code definitions describe an ignition-coil primary circuit fault, but others describe different ignition-related conditions. Diagnosis is needed to identify the cause.

Is P1352 the same on every vehicle?

No. The supplied references show that its definition varies by manufacturer and vehicle. Confirm the definition for the specific year, make, model, and engine.

Can I keep driving with P1352?

It depends on symptoms and the vehicle-specific fault. Rough running, power loss, starting trouble, or a flashing check-engine light warrant stopping when safe and seeking professional guidance.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.