Source-backed diagnostic reference

P1353 Code: Meaning & Diagnostic Guide

Misfire Cylinder 6 With Fuel Cut-off

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1353 mean?

  • BMW: Misfire Cylinder 6 With Fuel Cut-off Source
  • BUICK: IC Output High/Pulse Detected When Grounded Cyl.3 Source
  • CADILLAC: IC Output High/Pulse Detected When Grounded Cyl.3 Source
  • CHEVY: IC Output High/Pulse Detected When Grounded Cyl.3 Source
  • CHRYSLER: IC Output High Pulse Detected When Grounded Cyl 3 Source
  • FORD: Ignition Coil B Primary Circuit Fault Source
  • GM: IC Output High Pulse Detected When Grounded Cyl 3 Source
  • GMC: IC Output High Pulse Detected When Grounded Cyl 3 Source
  • LINCOLN: Ignition Coil B Primary Circuit Fault Source
  • MAZDA: Ignition Coil B Primary Circuit Source
  • MERCURY: Ignition Coil B Primary Circuit Fault Source
  • OLDSMOBILE: IC Output High Pulse Detected When Grounded Cyl 3 Source
  • OTHER: Ignition Coil B Primary Circuit Malfunction Source
  • SATURN: IC Output High Pulse Detected When Grounded Cyl.3 Source

P1353 quick answer

P1353 generally refers to an ignition coil B primary-circuit malfunction, but its exact meaning varies by vehicle make and model. Check the vehicle-specific code definition before assuming which circuit or cylinder is involved.

Is P1353 generic or manufacturer-specific?

P1353 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1353 works in the vehicle

The primary circuit is the low-voltage control side of an ignition coil. The supplied code references also assign P1353 to other manufacturer-specific descriptions, including ignition-control output signals and a cylinder 6 misfire with fuel cut-off. The code alone does not confirm a failed coil or identify one universal component.

P1353 symptoms

Depending on the vehicle and the underlying issue, possible symptoms include rough running, a misfire, reduced power, or an illuminated check-engine light. Some vehicles may show no noticeable symptoms.

Possible causes of P1353

Possible causes depend on the vehicle-specific definition and may involve an ignition-coil control circuit, its wiring or connections, or an ignition component. These are possibilities, not confirmed causes; P1353 alone does not establish which part has failed.

How to diagnose P1353

  1. Confirm the vehicle's year, make, model, engine, and the exact P1353 definition in reliable service information.
  2. Scan for other stored codes and review available freeze-frame data, which records conditions when the code was set.
  3. Use vehicle-specific diagnostic procedures to assess the relevant ignition circuit and related components.
  4. Have a qualified technician perform electrical testing if the diagnosis requires it; do not probe ignition components without the proper equipment and procedures.

How to fix P1353

Repair should follow the vehicle-specific diagnosis rather than replacing a coil based on the code alone. A technician may need to inspect the applicable wiring, connections, and ignition components, then verify the repair by rescanning the vehicle.

Can I drive with P1353?

Driving risk depends on symptoms and the vehicle. If the engine runs roughly, loses power, or the warning light flashes, reduce driving and arrange prompt professional assessment. If there are no symptoms, consult a technician soon and follow the vehicle's owner-manual guidance.

P1353 frequently asked questions

What does P1353 mean?

A general listing describes P1353 as an ignition coil B primary-circuit malfunction, but the definition differs among manufacturers. Verify it for the specific vehicle.

Does P1353 mean the ignition coil has failed?

No. It indicates a reported fault, not a confirmed failed part. Vehicle-specific testing is needed to identify the cause.

Can I keep driving with P1353?

It depends on how the vehicle behaves. Rough running, power loss, or a flashing warning light warrants prompt attention; consult the owner’s manual and a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.