P1355 Code: Meaning & Diagnostic Guide
Misfire Cylinder 7 With Fuel Cut-off
What does P1355 mean?
- BMW: Misfire Cylinder 7 With Fuel Cut-off Source
- BUICK: IC Output High/Pulse Detected When Grounded Cyl.5 Source
- CADILLAC: IC Output High/Pulse Detected When Grounded Cyl.5 Source
- CHEVY: IC Output High/Pulse Detected When Grounded Cyl.5 Source
- CHRYSLER: IC Output High Pulse Detected When Grounded Cyl 5 Source
- FORD: Ignition Coil D Primary Circuit Fault Source
- GM: IC Output High Pulse Detected When Grounded Cyl 5 Source
- GMC: IC Output High Pulse Detected When Grounded Cyl 5 Source
- LINCOLN: Ignition Coil D Primary Circuit Fault Source
- MERCURY: Ignition Coil D Primary Circuit Fault Source
- OLDSMOBILE: IC Output High Pulse Detected When Grounded Cyl 5 Source
- OTHER: Ignition Coil D Primary Circuit Malfunction Source
- SATURN: IC Output High Pulse Detected When Grounded Cyl.5 Source
- VOLKSWAGEN: Cylinder 1 Ignition Circuit Open Source
P1355 quick answer
P1355 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with different ignition-circuit, ignition-control, and misfire descriptions; the code alone does not identify a failed part.
Is P1355 generic or manufacturer-specific?
P1355 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1355 works in the vehicle
A diagnostic trouble code (DTC) is a label stored by a vehicle’s control system when it detects a condition outside expected parameters. For P1355, descriptions in the references vary by manufacturer and application, including an ignition coil primary-circuit fault, an ignition-control output signal issue, or a cylinder-specific misfire. Check the exact definition for the vehicle’s year, make, model, engine, and control system.
P1355 symptoms
Depending on the vehicle and underlying condition, a driver might notice rough running, reduced power, or an illuminated check-engine light. Some vehicles may show no obvious symptoms. These possibilities do not confirm what P1355 means for a particular vehicle.
Possible causes of P1355
Possible areas to investigate depend on the vehicle-specific code definition. They may include an ignition coil or its wiring and connections, an ignition-control circuit, or a misfire-related condition. The code by itself does not confirm a cause or failed component.
How to diagnose P1355
- Confirm the vehicle’s year, make, model, engine, and applicable P1355 definition using reliable service information.
- Scan for other codes and record freeze-frame data, which captures operating conditions when the code was stored.
- Use the vehicle-specific diagnostic procedure to check relevant wiring, connectors, and circuits for damage or poor connections.
- Perform any component or circuit tests specified by the manufacturer before replacing parts.
- Clear the code only after addressing the verified issue, then check whether it returns under appropriate test conditions.
How to fix P1355
Repair depends on the confirmed vehicle-specific diagnosis. Avoid replacing an ignition coil or other component based only on P1355; have the relevant circuit and parts tested using the correct service procedure.
Can I drive with P1355?
Driving impact depends on symptoms and the vehicle. If the engine runs roughly, loses power, or a warning light flashes, reduce driving and arrange prompt professional assessment. If the vehicle behaves normally, consult vehicle-specific guidance and schedule diagnosis rather than assuming the code is harmless.
P1355 frequently asked questions
Does P1355 mean the same thing on every vehicle?
No. The supplied references show different interpretations across manufacturers, so verify the definition for the exact vehicle.
Does P1355 confirm that an ignition coil has failed?
No. Some listings describe an ignition-coil circuit fault, but the code alone does not confirm a failed coil or any other component.
Can P1355 cause a misfire?
A misfire is one interpretation listed for a specific application. Whether it applies depends on the vehicle-specific definition and diagnostic results.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.