P1357 Code: Meaning & Diagnostic Guide
Misfire Cylinder 8 With Fuel Cut-off
What does P1357 mean?
- BMW: Misfire Cylinder 8 With Fuel Cut-off Source
- BUICK: IC Output High/Pulse Detected When Grounded Cyl.7 Source
- CADILLAC: IC Output High/Pulse Detected When Grounded Cyl.7 Source
- CHEVY: IC Output High/Pulse Detected When Grounded Cyl.7 Source
- CHRYSLER: IC Output High Pulse Detected When Grounded Cyl 7 Source
- FORD: Ignition Diagnostic Monitor Pulsewidth Not Defined Source
- GM: IC Output High Pulse Detected When Grounded Cyl 7 Source
- GMC: IC Output High Pulse Detected When Grounded Cyl 7 Source
- LINCOLN: Ignition Diagnostic Monitor Pulsewidth Not Defined Source
- MERCURY: Ignition Diagnostic Monitor Pulsewidth Not Defined Source
- OLDSMOBILE: IC Output High Pulse Detected When Grounded Cyl 7 Source
- SATURN: IC Output High Pulse Detected When Grounded Cyl.7 Source
- VOLKSWAGEN: Cylinder 1 Ignition Circuit Short To Ground Source
P1357 quick answer
P1357 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. Reference listings associate it with different ignition or misfire-related conditions; confirm the definition using the vehicle’s make, model, year, engine, and service information before diagnosing it.
Is P1357 generic or manufacturer-specific?
P1357 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1357 works in the vehicle
P1357 is in the P1xxx range, where code definitions are generally manufacturer-specific rather than universal. Reference data lists examples including an ignition-control output signal issue, an ignition diagnostic monitor pulse-width issue, a cylinder 8 misfire with fuel cut-off, and a cylinder 1 ignition circuit short to ground. These are different interpretations, not a single confirmed fault.
P1357 symptoms
Depending on the vehicle and the actual code definition, possible symptoms may include a check-engine light, rough running, misfire, reduced performance, or no obvious symptoms. The code alone does not establish which symptom or fault is present.
Possible causes of P1357
Possible causes depend on the vehicle-specific definition and test results. They may involve an ignition circuit or control signal, or an underlying misfire. P1357 alone does not confirm a failed part.
How to diagnose P1357
- Record the vehicle’s make, model, year, engine, and all stored codes, including pending codes and freeze-frame data.
- Look up P1357 in reliable service information for that exact vehicle; do not apply another manufacturer’s definition.
- Use scan-tool data and the manufacturer’s diagnostic procedure to check whether the reported fault is present and which circuit or cylinder is involved.
- Inspect relevant connectors and wiring for visible damage or poor connections, following the vehicle’s service procedures.
- Test suspected circuits or components only as directed by the correct service information, then clear the code and verify whether it returns.
How to fix P1357
Choose a repair only after confirming the vehicle-specific meaning and completing the required tests. Depending on the findings, a repair could involve wiring, a connection, or an ignition-related component, but the code by itself does not identify what to replace. Seek a qualified technician if diagnosis requires specialized equipment or procedures.
Can I drive with P1357?
Driving advice depends on the vehicle and symptoms. If the engine runs roughly, loses power, or the warning light flashes, reduce driving and arrange prompt professional assessment. If there are no symptoms, consult the owner’s manual or a technician soon rather than assuming the vehicle is safe or that the fault is harmless.
P1357 frequently asked questions
Does P1357 mean the same thing on every vehicle?
No. It is manufacturer-specific, and reference listings show several different definitions. Check service information for the exact vehicle.
Does P1357 identify a failed component?
No. It reports a detected condition, and further testing is needed to identify the cause.
Can I keep driving with P1357?
That depends on the vehicle and how it runs. Rough running, power loss, or a flashing warning light warrants prompt assessment; the code alone cannot determine driving safety.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.