Source-backed diagnostic reference

P1358 Code: Meaning & Diagnostic Guide

Misfire During Start Cylinder 9

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1358 mean?

  • BMW: Misfire During Start Cylinder 9 Source
  • BUICK: IC Output High/Pulse Detected When Grounded Cyl.8 Source
  • CADILLAC: IC Output High/Pulse Detected When Grounded Cyl.8 Source
  • CHEVY: IC Output High/Pulse Detected When Grounded Cyl.8 Source
  • CHRYSLER: IC Output High Pulse Detected When Grounded Cyl 8 Source
  • FORD: Ignition Diagnostic Monitor Signal Out of Self-Test Range Source
  • GM: IC Output High Pulse Detected When Grounded Cyl 8 Source
  • GMC: IC Output High Pulse Detected When Grounded Cyl 8 Source
  • LINCOLN: Ignition Diagnostic Monitor Signal Out of Self-Test Range Source
  • MAZDA: Ignition Diagnostic Monitor Signal Out Of Self Test Range Source
  • MERCURY: Ignition Diagnostic Monitor Signal Out of Self-Test Range Source
  • OLDSMOBILE: IC Output High Pulse Detected When Grounded Cyl 8 Source
  • SATURN: IC Output High Pulse Detected When Grounded Cyl.8 Source
  • VOLKSWAGEN: Cylinder 2 Ignition Circuit Open Source

P1358 quick answer

P1358 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with several ignition-related conditions, but the code alone does not identify a confirmed failed part.

Is P1358 generic or manufacturer-specific?

P1358 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1358 works in the vehicle

The references describe P1358 differently: examples include an ignition-control signal detected when grounded, an ignition diagnostic monitor signal outside its self-test range, a cylinder-specific ignition circuit open, and a misfire during startup. These descriptions are not interchangeable. Check the exact definition for the vehicle's make, model, year, engine, and service information.

P1358 symptoms

Depending on the vehicle and the underlying issue, possible symptoms may include difficult starting, rough running, a misfire, reduced performance, or an illuminated check-engine light. Some vehicles may show few noticeable symptoms.

Possible causes of P1358

Possible causes depend on the vehicle-specific definition and may involve ignition-system wiring or connections, an ignition component, or a signal monitored by the engine control system. P1358 alone does not confirm any of these causes.

How to diagnose P1358

  1. Record the vehicle's make, model, year, engine, and all stored codes before clearing anything.
  2. Look up the P1358 definition and diagnostic procedure for that specific vehicle.
  3. Note whether the code is current or pending and review freeze-frame data, which records operating conditions when the fault was detected.
  4. Following vehicle-specific service information, inspect relevant wiring and connectors for visible damage, looseness, or corrosion.
  5. Use appropriate scan-tool tests and electrical checks to distinguish a circuit, component, or signal problem; seek a qualified technician if the procedure requires specialized equipment.

How to fix P1358

Repair should follow the vehicle-specific test results, not the code label alone. Depending on what testing finds, the repair may involve a connection, wiring, or an ignition-system component. Do not replace parts without confirming the fault, and consult a qualified technician when needed.

Can I drive with P1358?

Driving risk depends on symptoms and the vehicle. If the engine runs very roughly, loses power, stalls, or the check-engine light flashes, stop when safe and arrange professional help. If symptoms are absent or mild, consult vehicle-specific guidance and have the code diagnosed promptly; P1358 alone cannot determine whether continued driving is safe.

P1358 frequently asked questions

Does P1358 mean the same thing on every vehicle?

No. The supplied references give different definitions for different manufacturers, so use the definition and diagnostic procedure for the specific vehicle.

Does P1358 confirm a failed ignition component?

No. It identifies a monitored condition, not a confirmed failed part. Further diagnosis is needed.

Can P1358 cause a misfire or starting problem?

Those symptoms are possible for some vehicle-specific interpretations, but they are not established for every vehicle with this code.

Can I keep driving with P1358?

The code alone does not establish that. Consider the symptoms and vehicle-specific guidance; stop when safe and seek help if the engine runs very roughly, loses power, stalls, or the check-engine light flashes.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.