Source-backed diagnostic reference

P1359 Code: Meaning & Diagnostic Guide

CKP TDC Sensor Circuit Connector Disconnection

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1359 mean?

  • ACURA: CKP TDC Sensor Circuit Connector Disconnection Source
  • BMW: Misfire Cylinder 9 With Fuel Cut-off Source
  • BUICK: Ignition Control Circuit Group A Source
  • CADILLAC: Ignition Control Circuit Group A Source
  • CHEVY: Ignition Control Circuit Group A Source
  • CHRYSLER: Ignition Control Circuit Group A Source
  • FORD: Spark Output Circuit Fault Source
  • GM: Ignition Control Circuit Group A Source
  • GMC: Ignition Control Circuit Group A Source
  • HONDA: CKP TDC Sensor Circuit Connector Disconnection Source
  • INFINITI: CKP TDC Sensor Circuit Connector Disconnection Source
  • LINCOLN: Spark Output Circuit Fault Source
  • MAZDA: SPOUT Signal Lost To Powertrain Control Module Or Out Of Range Source
  • MERCURY: Spark Output Circuit Fault Source
  • OLDSMOBILE: Ignition Control Circuit Group A Source
  • SATURN: Ignition Control Circuit Group A Source
  • VOLKSWAGEN: Cylinder 2 Ignition Circuit Short To B+ Source

P1359 quick answer

P1359 is a manufacturer-specific powertrain code, so its exact meaning depends on the vehicle. The supplied definitions point to different ignition, spark-output, or crankshaft-position signal issues; the code alone does not identify a failed part.

Is P1359 generic or manufacturer-specific?

P1359 currently has manufacturer-labelled reference definitions for ACURA, BMW, BUICK, CADILLAC, CHEVY, CHRYSLER and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1359 works in the vehicle

Diagnostic trouble codes in this range can have different definitions across manufacturers. In the supplied reference, P1359 is associated with ignition control or spark-output circuits on some vehicles and a crankshaft-position (CKP) or top-dead-center (TDC) sensor circuit connector on others. Check the definition for the vehicle’s exact make, model, year, and engine before diagnosing it.

P1359 symptoms

Depending on the vehicle and the underlying issue, possible signs may include a check-engine light, rough running, misfires, reduced power, or difficulty starting. Some vehicles may show no obvious symptoms. These signs are not confirmed by the code alone.

Possible causes of P1359

Possible explanations depend on the vehicle-specific definition and may include a loose or damaged connector, wiring or circuit trouble, or a problem affecting ignition timing or spark control. P1359 by itself does not confirm any of these causes or identify a failed component.

How to diagnose P1359

  1. Confirm the vehicle’s make, model, year, engine, and the manufacturer-specific definition of P1359.
  2. Use a scan tool to record all codes and available freeze-frame data before clearing anything.
  3. Check for related codes and note any symptoms or conditions present when the code was set.
  4. Have the relevant connector, wiring, and circuit checked against vehicle-specific service information.
  5. If the cause is not clear, ask a qualified technician to perform the vehicle-specific tests rather than replacing parts based on the code alone.

How to fix P1359

The appropriate repair depends on the confirmed vehicle-specific cause. A technician may need to inspect or test the circuit, connector, or related ignition or position-signal system. Do not replace a sensor or other component solely because P1359 is stored.

Can I drive with P1359?

Driving advice depends on the symptoms and the vehicle. If the engine runs roughly, loses power, stalls, or the warning light flashes, stop when safe and seek prompt professional help. If there are no noticeable symptoms, arrange diagnosis soon and follow the vehicle’s manual; the code alone cannot establish that continued driving is safe.

P1359 frequently asked questions

Does P1359 mean the same thing on every vehicle?

No. The supplied reference lists different manufacturer-specific meanings, so confirm the definition for the exact vehicle.

Does P1359 confirm a failed sensor or ignition part?

No. It identifies a reported circuit or system condition, not a confirmed failed component. Further testing is needed.

Can I keep driving with P1359?

That depends on how the vehicle behaves and the manufacturer-specific diagnosis. Rough running, stalling, loss of power, or a flashing warning light calls for stopping when safe and getting professional assistance.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.