Source-backed diagnostic reference

P1367 Code: Meaning & Diagnostic Guide

TDC2 Sensor No Signal

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1367 mean?

  • ACURA: TDC2 Sensor No Signal Source
  • BUICK: IC Cylinder 7 Not Toggling After Enable Source
  • CADILLAC: IC Cylinder 7 Not Toggling After Enable Source
  • CHEVY: IC Cylinder 7 Not Toggling After Enable Source
  • CHRYSLER: IC Cylinder 7 Not Toggling After Enable Source
  • GM: IC Cylinder 7 Not Toggling After Enable Source
  • GMC: IC Cylinder 7 Not Toggling After Enable Source
  • HONDA: TDC2 Sensor No Signal Source
  • INFINITI: TDC2 Sensor No Signal Source
  • JAGUAR: Ignition System Failure Group 1 Source
  • OLDSMOBILE: IC Cylinder 7 Not Toggling After Enable Source
  • OTHER: Ignition Spare Source
  • SATURN: IC Cylinder 7 Not Toggling After Enable Source
  • VOLKSWAGEN: Cylinder 5 Ignition Circuit Open Source

P1367 quick answer

P1367 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with different issues, including a TDC2 sensor signal, an ignition-system fault, or a cylinder ignition-circuit signal. Check the code definition for your exact make, model, year, and engine before diagnosing.

Is P1367 generic or manufacturer-specific?

P1367 currently has manufacturer-labelled reference definitions for ACURA, BUICK, CADILLAC, CHEVY, CHRYSLER, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1367 works in the vehicle

A diagnostic trouble code (DTC) records a condition detected by a vehicle's control system. In the supplied evidence, P1367 has several definitions: some vehicles are listed as having no TDC2 sensor signal; others as an ignition system failure, a cylinder 7 ignition-control signal that is not changing as expected, or an open cylinder 5 ignition circuit. These descriptions are not interchangeable and do not confirm which part, if any, has failed.

P1367 symptoms

The code alone does not establish what symptoms will occur. Depending on the vehicle-specific definition and the underlying condition, there may be no obvious symptoms or there may be engine-running problems. A stored code or warning light should be interpreted alongside scan data and the vehicle's behavior.

Possible causes of P1367

Possible areas to investigate depend on the correct vehicle-specific definition. They may include the relevant sensor or ignition circuit, its wiring and connectors, or related control-system signals. The evidence does not identify a confirmed cause or failed component.

How to diagnose P1367

  1. Confirm the vehicle's make, model, year, engine, and the exact P1367 description using reliable vehicle-specific service information.
  2. Scan for other codes and record freeze-frame data before clearing anything; these details can help show when the fault occurred.
  3. Follow the diagnostic procedure for that vehicle and code definition, checking relevant wiring and connectors for visible damage or poor connections.
  4. Use the specified tests and tools to verify circuit signals and related components; do not replace parts based only on the code description.
  5. If the required tests or equipment are unavailable, have a qualified technician continue diagnosis.

How to fix P1367

There is no single repair for P1367 across all vehicles. Repair only the issue confirmed by vehicle-specific testing, then clear the code and verify whether it returns under the prescribed conditions. Avoid replacing a sensor, ignition component, or control module without supporting test results.

Can I drive with P1367?

The code alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, stalls, loses power, or a warning indicates an urgent problem, stop in a safe place and arrange professional assessment. If there are no symptoms, consult vehicle-specific service guidance promptly and monitor for changes.

P1367 frequently asked questions

What does P1367 mean?

Its meaning varies by vehicle. The supplied references list several sensor and ignition-related descriptions, so confirm the definition for your exact vehicle.

Does P1367 identify a failed part?

No. It reports a detected condition, and the code alone does not confirm which component or circuit is responsible.

Can I drive with P1367?

The code alone is not enough to decide. Consider how the vehicle behaves, follow its warning guidance, and seek diagnosis if it runs poorly or develops other symptoms.

Should I replace the sensor or ignition part named in a code description?

Not without testing. First verify that the description applies to your vehicle, then follow its diagnostic procedure to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.