P1374 Code: Meaning & Diagnostic Guide
3X Reference Circuit
What does P1374 mean?
- BUICK: 3X Reference Circuit Source
- CADILLAC: 3X Reference Circuit Source
- CHEVY: 3X Reference Circuit Source
- CHRYSLER: 3X Reference Circuit Source
- GM: 3X Reference Circuit Source
- GMC: 3X Reference Circuit Source
- JAGUAR: Ignition Coil Cylinder 4 Early Activation Fault Source
- OLDSMOBILE: 3X Reference Circuit Source
- OTHER: Crankshaft Position (CKP)/Ignition Coil - Cylinder 4 - Early Activation Fault Source
- SATURN: 3X Reference Circuit Source
- VOLKSWAGEN: Cylinder 7 Ignition Circuit Short To B+ Source
P1374 quick answer
P1374 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied reference lists “3X Reference Circuit” for several GM makes, and different ignition-related definitions for Jaguar, Volkswagen, and other applications. Check the code against the vehicle’s make, model, year, and engine before diagnosing it.
Is P1374 generic or manufacturer-specific?
P1374 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, GM, GMC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1374 works in the vehicle
A “3X reference circuit” is a signal circuit used by some engine-management systems to help coordinate ignition timing. Other supplied definitions describe an ignition-coil activation or circuit fault. These descriptions are not interchangeable; the vehicle-specific service information determines what P1374 means on a particular vehicle.
P1374 symptoms
Depending on the vehicle and the actual fault, there may be no obvious symptoms, or the engine may run roughly, misfire, be difficult to start, or show reduced performance. The evidence does not establish that any one symptom is present whenever P1374 is stored.
Possible causes of P1374
Possible causes depend on the vehicle-specific definition and may include a wiring or connector problem, a signal or ignition-component fault, or an issue in the relevant control circuit. The code alone does not confirm a failed component.
How to diagnose P1374
- Confirm the vehicle’s make, model, year, engine, and exact stored code; look up P1374 in the correct service information.
- Read all stored and pending codes and note freeze-frame data, which records operating conditions when the fault was detected.
- Use the vehicle-specific diagnostic procedure to identify which circuit or signal P1374 refers to.
- With the ignition off, visually inspect the relevant accessible wiring and connectors for damage, looseness, corrosion, or contamination.
- If the cause is not clear, have a qualified technician test the specified circuit and components using the manufacturer’s procedure before replacing parts.
How to fix P1374
Repair should follow the vehicle-specific diagnosis. A verified wiring or connector issue may require repair; a component should be replaced only if testing confirms it is faulty. Clear the code after repairs and verify whether it returns. Do not rely on a definition from another make or model.
Can I drive with P1374?
Driving advice depends on symptoms and the vehicle. If the engine is misfiring, stalling, or losing power, avoid continued driving when it would be unsafe and arrange prompt professional diagnosis. If there are no symptoms, consult the vehicle-specific guidance and have the code checked soon; the code alone does not establish that driving is safe or unsafe.
P1374 frequently asked questions
What does P1374 mean?
Its meaning varies by vehicle. The supplied references list a 3X reference-circuit definition for several GM makes, but other makes have different ignition-related definitions.
Does P1374 identify a failed part?
No. It identifies a detected code condition, not a confirmed failed component. Vehicle-specific tests are needed to find the cause.
Can I diagnose P1374 using a definition from another vehicle?
No. Confirm the definition for the exact make, model, year, and engine, because P1374 is manufacturer-specific.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.