P1375 Code: Meaning & Diagnostic Guide
24X Reference Circuit High Voltage
What does P1375 mean?
- BUICK: 24X Reference Circuit High Voltage Source
- CADILLAC: 24X Reference Circuit High Voltage Source
- CHEVY: 24X Reference Circuit High Voltage Source
- CHRYSLER: 24X Reference Circuit High Voltage Source
- GM: 24X Reference Circuit High Voltage Source
- GMC: 24X Reference Circuit High Voltage Source
- JAGUAR: Ignition Coil Cylinder 5 Early Activation Fault Source
- OLDSMOBILE: 24X Reference Circuit High Voltage Source
- OTHER: Ignition Coil - Cylinder 5 - Early Activation Fault Source
- SATURN: 24X Reference Circuit High Voltage Source
- VOLKSWAGEN: Cylinder 7 Ignition Circuit Short To Ground Source
P1375 quick answer
P1375 has different meanings depending on the vehicle. The supplied references list it as a 24X reference-circuit high-voltage fault for several GM-related makes, but as an ignition-coil fault for some other applications. Confirm the vehicle details and manufacturer-specific definition before diagnosing it.
Is P1375 generic or manufacturer-specific?
P1375 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, GM, GMC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1375 works in the vehicle
A diagnostic trouble code (DTC) records a fault detected by a vehicle’s control system. P1375 is not described consistently across the supplied references: it may concern a 24X reference signal, ignition-coil activation, or an ignition circuit short to ground. A 24X reference circuit carries an engine-position signal used by the control system; “high voltage” means the reported signal level is above the expected range, not that a particular part has been proven faulty.
P1375 symptoms
Symptoms depend on the vehicle and which P1375 definition applies. A vehicle might have a warning light, rough running, misfires, difficult starting, or no noticeable symptoms; the supplied evidence does not establish any of these as universal.
Possible causes of P1375
Possible causes depend on the vehicle-specific definition. For a 24X reference-circuit description, wiring, connectors, the signal circuit, or a related sensor or control issue may warrant checking. For an ignition-coil description, the coil circuit or its wiring may be relevant. The code alone does not confirm a failed component.
How to diagnose P1375
- Check the vehicle’s make, model, year, engine, and market, then look up P1375 in service information for that exact vehicle.
- Use a compatible scan tool to record all codes and available freeze-frame data before clearing anything.
- Compare the symptoms and any related codes with the vehicle-specific diagnostic procedure.
- Inspect accessible wiring and connectors related to the applicable circuit for visible damage, loose connections, or corrosion.
- Have a qualified technician test the circuit using the correct service information and equipment; do not replace parts based on the code alone.
How to fix P1375
The repair depends on the confirmed code definition and test results. It may involve correcting a wiring or connector problem, or addressing another verified circuit fault. Use vehicle-specific service information or a qualified technician, and do not treat P1375 alone as proof that a sensor, coil, or control module has failed.
Can I drive with P1375?
The code by itself does not establish whether the vehicle is safe to drive. If the engine runs roughly, stalls, is difficult to start, or the warning light is flashing, stop driving when safe and arrange an assessment. If there are no noticeable symptoms, get the code checked promptly and follow the vehicle manufacturer’s guidance.
P1375 frequently asked questions
What does P1375 mean?
Its meaning varies by vehicle. The supplied references associate it with a 24X reference-circuit high-voltage condition on several makes, but list different ignition-related meanings for other applications.
Does P1375 identify a failed part?
No. It reports a detected condition, and the code description alone does not confirm which component, if any, has failed.
Can I diagnose P1375 without knowing the vehicle details?
Not reliably. Confirm the make, model, year, and engine first because the supplied references show that P1375 has different definitions.
Should I clear P1375 before diagnosis?
Record the code and available freeze-frame information first. Clearing it can remove useful diagnostic context.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.